DIME - Sample Record for DIME Sample ID 2024-04-07-5

DIME » All Projects » Project - DEA: 112N1414 » Sample 2024-04-07-5 » Sample Details

Sample Record

Owner Lab

CT D11 - District 11 Materials Laboratory

DIME Sample ID 2024-04-07-5

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 994612 DEA: 112N1414 EFIS: 1121000253
DIST-CO-RTE-PM	11-SD-15,78-Various
Award Date	05/26/2023
Closeout Date	09/26/2024
Work Description	PLACE METHACRYLATE, POLYESTER CONCRETE, JOINT SEALS AND REPAIR SPALLS.
Location Description	SAN DIEGO COUNTY AT VARIOUS LOCATIONS
QA Service Level	1 (Verified on 08/22/2023)

Sample Information

Sample Taken Date	04/07/2024	Sample Unique Key	5
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/08/2024
Sample type	Quality Assurance	A brief description of the sample	PSU
The quantity of what the sample constitutes	3 bags	From where was the sample collected	Source
First name of sampler or witnessed by	Ben	Last name of sampler or witnessed by	Smith
Title of sampler		Telephone number of sampler
Laboratory sample identification	0401-PSU	Linked DIME Sample ID	2024-04-07-4
The fabricator/manufacturer/facility name	Martin Marietta	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	N/A
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2024-04-07-5-5	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Shawn Rivers, CT D11 - District 11 Materials Laboratory	04/11/2024	04/09/2024	Yes	04/22/2024		Public - Test Data Visible
2024-04-07-5-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Shawn Rivers, CT D11 - District 11 Materials Laboratory	04/11/2024	04/09/2024	Yes	04/22/2024	Test results are within specification limits.	Public - Test Data Visible
2024-04-07-5-3	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Shawn Rivers, CT D11 - District 11 Materials Laboratory	04/11/2024	04/09/2024	Yes	04/22/2024	Test results are within specification limits.	Public - Test Data Visible
2024-04-07-5-11	AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Joseph Seymour, CT D11 - District 11 Materials Laboratory	04/11/2024	04/09/2024	Yes	04/22/2024	RAP Rice	Public - Test Data Visible
2024-04-07-5-6	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Mohammad Abbassi, CT D11 - District 11 Materials Laboratory	04/11/2024	04/09/2024	Yes	04/22/2024	Complies	Public - Test Data Visible
2024-04-07-5-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Shawn Rivers, CT D11 - District 11 Materials Laboratory	04/11/2024	04/10/2024	Yes	04/22/2024	Test results are within specification limits.	Public - Test Data Visible
2024-04-07-5-4	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Shawn Rivers, CT D11 - District 11 Materials Laboratory	04/11/2024	04/10/2024	Yes	04/22/2024		Public - Test Data Visible
2024-04-07-5-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Mohammad Abbassi, CT D11 - District 11 Materials Laboratory	04/11/2024	04/11/2024	Yes	04/22/2024	complies	Public - Test Data Visible
2024-04-07-5-8	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Mohammad Abbassi, CT D11 - District 11 Materials Laboratory	04/11/2024	04/12/2024	Yes	04/22/2024	100cycle<12% 500 cycle<40%	Public - Test Data Visible
2024-04-07-5-10	AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)	Joseph Seymour, CT D11 - District 11 Materials Laboratory	04/11/2024	04/16/2024	Yes	04/22/2024	Rap T-30	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2024-04-07-5-5 CTM 204-June 2010 (Verified)
DIME Test ID: 2024-04-07-5-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2024-04-07-5-3 ASTM D4791-10 (Verified)
DIME Test ID: 2024-04-07-5-11 AASHTO T209-22 (Verified)
DIME Test ID: 2024-04-07-5-6 AASHTO T84-14 (Verified)
DIME Test ID: 2024-04-07-5-1 AASHTO T27-14 (Verified)
DIME Test ID: 2024-04-07-5-4 AASHTO T176-08 (Verified)
DIME Test ID: 2024-04-07-5-7 AASHTO T85-13 (Verified)
DIME Test ID: 2024-04-07-5-8 AASHTO T96-02r10 (Verified)
DIME Test ID: 2024-04-07-5-10 AASHTO T30-19 (Verified)