DIME » All Projects » Project - DEA: 112N1414 » Sample 2024-04-07-4 » Sample Details

Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2024-04-07-4

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994612
DEA: 112N1414
EFIS: 1121000253
DIST-CO-RTE-PM11-SD-15,78-Various
Award Date05/26/2023
Closeout Date09/26/2024
Work DescriptionPLACE METHACRYLATE, POLYESTER CONCRETE, JOINT SEALS AND REPAIR SPALLS.
Location DescriptionSAN DIEGO COUNTY AT VARIOUS LOCATIONS
QA Service Level1 (Verified on 08/22/2023)

Sample Information

Sample Taken Date04/07/2024 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/08/2024
Sample typeQuality Assurance A brief description of the samplePSU
The quantity of what the sample constitutes12 boxes From where was the sample collectedSource
First name of sampler or witnessed byBen Last name of sampler or witnessed bySmith
Title of sampler Telephone number of sampler
Laboratory sample identification0401-PSU Linked DIME Sample ID
The fabricator/manufacturer/facility nameMartin Marietta Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading1/2 inch Lot number
Sublot number HMA Mix Number21217005SR

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2024-04-07-4-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Joseph Seymour, CT D11 - District 11 Materials Laboratory04/10/2024Joseph Seymour
Yes
04/22/2024Failure
2024-04-07-4-2AASHTO T209-22: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Joseph Seymour, CT D11 - District 11 Materials Laboratory04/11/2024Joseph Seymour
Yes
04/22/2024Complies difference of 0.014 Contractor results of 2.472
2024-04-07-4-3AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Joseph Seymour, CT D11 - District 11 Materials Laboratory04/11/2024Joseph Seymour
Yes
04/22/2024Complies
2024-04-07-4-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Melchor Oronoz, CT D11 - District 11 Materials Laboratory04/11/2024Melchor Oronoz
Yes
04/22/2024
2024-04-07-4-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Joseph Seymour, CT D11 - District 11 Materials Laboratory04/22/2024Joseph Seymour
Yes
04/22/2024Complies
2024-04-07-4-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltJoseph Seymour/ DP. Smith, CT D11 - District 11 Materials Laboratory04/11/2024Joseph Seymour
Yes
04/22/2024Complies < 12.7mm Tested 2.11mm
2024-04-07-4-7AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Joseph Seymour/ DP. Smith, CT D11 - District 11 Materials Laboratory04/11/2024Joseph Seymour
Yes
04/22/20243 RAP Burns

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2024-04-07-4-1 AASHTO T308-10 (Verified)
DIME Test ID: 2024-04-07-4-2 AASHTO T209-22 (Verified)
DIME Test ID: 2024-04-07-4-3 AASHTO T269-14 (Verified)
DIME Test ID: 2024-04-07-4-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2024-04-07-4-5 AASHTO T283-14 (Verified)
DIME Test ID: 2024-04-07-4-6 CTM 389-19 (Verified)
DIME Test ID: 2024-04-07-4-7 AASHTO T308-10 (Verified)