DIME - Sample Record for DIME Sample ID 2024-02-05-10

DIME » All Projects » Project - DEA: JMF-DATA » Sample 2024-02-05-10 » Sample Details

Sample Record

Owner Lab

CT D04 - Pleasanton Field Laboratory

DIME Sample ID 2024-02-05-10

Project Information

Project Identifiers	Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA
DIST-CO-RTE-PM	59---
Award Date	Not set
Closeout Date	Not set
Work Description	Special project for storing JMF sample data
Location Description	Not set
QA Service Level	NOT VERIFIED

Sample Information

Sample Taken Date	02/05/2024	Sample Unique Key	10
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/05/2024
Sample type	Quality Control	A brief description of the sample	3/4" HMA-A w/ 25% RAP WM
The quantity of what the sample constitutes	100%	From where was the sample collected	Supplier
First name of sampler or witnessed by	Vuong	Last name of sampler or witnessed by	Dao
Title of sampler	Not set	Telephone number of sampler	Not set
Laboratory sample identification	Not set	Linked DIME Sample ID	Not set
The fabricator/manufacturer/facility name	DeSilva Gates Aggregates-Sunol HMA	Transportation Laboratory (TL) Number	Not set
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier	Not set
Structure name	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-01-0007
The fabricator's/manufacturer's product name for the sample	Not set	The fabricator/manufacturer designation for the sample	Not set
The plant number	Not set	A detailed description of where the material sample was collected	DeSilva Gates
Where the material sample would have been placed if not sampled	Not set	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set

JMF Information

HMA Design ID	JMF3512-2024-9-MD 6742 WM	Date Created	02/07/2024
Submittal	JMF3511-288-2024-5 Submittal Completeness in Review

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2024-02-05-10-1	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-2	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-3	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-4	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-5	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-6	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-7	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-8	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-9	AASHTO T100-15: Standard Method of Test for Specific Gravity of Soils (Specific Gravity)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao
2024-02-05-10-10	CTM 227-December 2014: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness)	Gallagher and Burk Materials, CT D04 - Pleasanton Field Laboratory	02/05/2024	Vuong Dao	Yes	02/16/2024	Submitted from JMF - Vuong Dao

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2024-02-05-10-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2024-02-05-10-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2024-02-05-10-3 AASHTO T176-08 (Verified)
DIME Test ID: 2024-02-05-10-4 AASHTO T304-11 (Verified)
DIME Test ID: 2024-02-05-10-5 ASTM D4791-10 (Verified)
DIME Test ID: 2024-02-05-10-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2024-02-05-10-7 AASHTO T85-13 (Verified)
DIME Test ID: 2024-02-05-10-8 AASHTO T84-14 (Verified)
DIME Test ID: 2024-02-05-10-9 AASHTO T100-15 (Verified)
DIME Test ID: 2024-02-05-10-10 CTM 227-December 2014 (Verified)
DIME Test ID: 2024-02-05-10-11 AASHTO T210-15 (Verified)
DIME Test ID: 2024-02-05-10-12 AASHTO T100-15 (Verified)
DIME Test ID: 2024-02-05-10-13 AASHTO T104-99r16 (Verified)