DIME » All Projects » Project - DEA: 023J7704 » Sample 2023-08-14-98 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2023-08-14-98

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994387
DEA: 023J7704
EFIS: 0222000082
DIST-CO-RTE-PM02-SIS-96-97.2/103.0
Award Date12/23/2022
Closeout Date04/11/2024
Work DescriptionRHMA OVERLAY, REPLACE AC SURFACING, GUARDRAIL AND TRAFFIC STRIPE.
Location DescriptionSISKIYOU COUNTY ABOUT 21 MILES EAST OF HORSE CREEK FROM 4.2 MILES EAST OF EMPIRE CREEK BRIDGE TO 0.4 MILE WEST OF ROUTE 263
QA Service Level1 (Verified on 03/28/2023)

Sample Information

Sample Taken Date08/14/2023 Sample Unique Key98
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/14/2023
Sample typeProduction Start-Up A brief description of the sampleCombined Untreated 1/2-inch Type G Aggregate
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byJoe Last name of sampler or witnessed byDelgado
Title of sampler Telephone number of sampler
Laboratory sample identificationD79324F Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis — Northstate Asphalt (Redding, CA) Transportation Laboratory (TL) Number841613
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0057:: Shasta Ranch Aggregates (Anderson, CA)
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedLaboratory Batched from Sized Untreated Stockpile Samples
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2023-08-14-98-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Ward Jenkins, CT D02 - Redding Northern Regional Laboratory02/05/202402/05/2024
Yes
02/12/2024P¾″=100.%, P½″=97%, P⅜″=88%, P№4=37%, P№8=20.%, P№200=4.4%Public - Test Data Visible
2023-08-14-98-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Joe Mishoe, CT D02 - Redding Northern Regional Laboratory02/08/202402/12/2024
Yes
02/12/2024Pc2=100.%, Pf1=100.%Public - Test Data Visible
2023-08-14-98-3AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Sean McWithey, CT D02 - Redding Northern Regional Laboratory02/08/202402/12/2024
Yes
02/12/2024L100=4%, L500=16%Public - Test Data Visible
2023-08-14-98-4AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Josh Ferency, CT D02 - Redding Northern Regional Laboratory02/08/202402/12/2024
Yes
02/12/2024SE=73Public - Test Data Visible
2023-08-14-98-5AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Sean McWithey and J. Ferency, CT D02 - Redding Northern Regional Laboratory02/08/202402/12/2024
Yes
02/12/2024Dc=87, Df=88Public - Test Data Visible
2023-08-14-98-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Josh Ferency, CT D02 - Redding Northern Regional Laboratory02/08/202402/12/2024
Yes
02/12/2024Us=46.8%Public - Test Data Visible
2023-08-14-98-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Josh Ferency, CT D02 - Redding Northern Regional Laboratory02/08/202402/12/2024
Yes
02/12/2024F&E(5:1)=3%Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-08-14-98-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-08-14-98-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-08-14-98-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-08-14-98-4 AASHTO T176-08 (Verified)
DIME Test ID: 2023-08-14-98-5 AASHTO T210-15 (Verified)
DIME Test ID: 2023-08-14-98-6 AASHTO T304-11 (Verified)
DIME Test ID: 2023-08-14-98-7 ASTM D4791-10 (Verified)