DIME » All Projects » Project - DEA: 023J8204 » Sample 2023-07-10-70 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2023-07-10-70

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 994544
DEA: 023J8204
EFIS: 0222000087
DIST-CO-RTE-PM02-SIS-5-R19.0/R25.3
Award Date05/11/2023
Closeout Date04/11/2024
Work DescriptionCOLD PLANE AC PAVEMENT AND PLACE RUBBERIZED HMA (GAP GRADED).
Location DescriptionSISKIYOU COUNTY IN AND NEAR WEED FROM 0.1 MILE SOUTH OF ROUTE 97 TO 0.1 MILE NORTH OF NORTH EDGEWOOD OVERHEAD
QA Service Level1 (Verified on 08/07/2023)

Sample Information

Sample Taken Date07/10/2023 Sample Unique Key70
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/10/2023
Sample typeProduction Start-Up A brief description of the sample16 boxes of Lime Treated 1/2-inch RHMA-G (PG 64-16 CR) with virgin PG 64-16 from Valero (Benicia)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byRandy Last name of sampler or witnessed byBibbens
Title of samplerCGI Telephone number of sampler
Laboratory sample identificationD79288 Linked DIME Sample ID
The fabricator/manufacturer/facility nameJ.F. Shea Construction - Fawndale Rock and Asphalt (Redding, CA) Transportation Laboratory (TL) Number897596
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeRHMA-G
HMA Grading1/2 inch Lot number
Sublot number HMA Mix NumberJMF351320237

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2023-07-10-70-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terry McCormick, CT D02 - Redding Northern Regional Laboratory08/15/2023Ward Jenkins
Yes
11/02/2023Pb=7.45%
2023-07-10-70-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/10/2023Ward Jenkins
Yes
11/02/2023Gmm=2.493
2023-07-10-70-3AASHTO T312-14: Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor (Method of Compaction)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/12/2023Ward Jenkins
Yes
11/02/2023%Gmm8=86.1%, %Gmm150=96.6%
2023-07-10-70-4AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/12/2023Ward Jenkins
Yes
11/02/2023Gmb=2.403
2023-07-10-70-5AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory07/12/2023Ward Jenkins
Yes
11/02/2023AASHTO T 269: Pa=3.6%, MS-2: VMA=19.3%, DP=0.5
2023-07-10-70-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Colt Sweeny and Josh Murphy, CT D02 - Redding Northern Regional Laboratory07/18/2023Ward Jenkins
Yes
11/02/2023S1=100psi, S2=92psi, TSR=92%
2023-07-10-70-7CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDennis Hickey, CT D02 - Redding Northern Regional Laboratory08/03/2023Ward Jenkins
Yes
11/02/2023CT389: Nf>15000, SIP>15000; CT360: SA=0.1g/cm²

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2023-07-10-70-1 AASHTO T308-10 (Verified)
DIME Test ID: 2023-07-10-70-2 AASHTO T209-12 (Verified)
DIME Test ID: 2023-07-10-70-3 AASHTO T312-14 (Verified)
DIME Test ID: 2023-07-10-70-4 AASHTO T275-07r12 (Verified)
DIME Test ID: 2023-07-10-70-5 AASHTO T269-14 (Verified)
DIME Test ID: 2023-07-10-70-6 AASHTO T283-14 (Verified)
DIME Test ID: 2023-07-10-70-7 CTM 389-19 (Verified)