Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2023-10-09-24
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 994441 DEA: 081A8304 EFIS: 0800000579 COOP: 081746 |
|---|---|
| DIST-CO-RTE-PM | 08--- |
| Award Date | 10/05/2022 |
| Closeout Date | Not set |
| Work Description | Widening the existing Cedar Avenue overcrossing (OC) from 6 to 10 lanes, replacing the Union Pacific Railroad overhead (OH), widening Cedar Avenue from 4 to 6 through lanes, and realigning and/or widening the interchange entrance and exit ramps |
| Location Description | At the Interstate 10 (I-10) Cedar Avenue Interchange from PM 17.8 to 19.3 in the County of San Bernardino (County) |
| QA Service Level | 2 (Verified on 12/13/2022) |
Sample Information
| Sample Taken Date | 10/09/2023 | Sample Unique Key | 24 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/10/2023 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R15 0.50% LAS |
| The quantity of what the sample constitutes | 3 Bags Of comb. Virgin Agg., 3 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0515A-23 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Materials- Corona Drum | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0027, 91-33-0073 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials- Corona | |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | 224112 CORD SJR | Lot number | |
| Sublot number | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2023-10-09-24-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Marcos Campos, CT D08 - Fontana Southern Regional Laboratory | 11/17/2023 | 11/17/2023 | No | ||||
| 2023-10-09-24-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Marta Landaverde, CT D08 - Fontana Southern Regional Laboratory | 10/14/2023 | 11/17/2023 | No | ||||
| 2023-10-09-24-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Ali Rehman, CT D08 - Fontana Southern Regional Laboratory | 10/12/2023 | 11/17/2023 | No | ||||
| 2023-10-09-24-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Marcos Campos, CT D08 - Fontana Southern Regional Laboratory | 10/17/2023 | 11/17/2023 | No | ||||
| 2023-10-09-24-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Marcos Campos, CT D08 - Fontana Southern Regional Laboratory | 10/16/2023 | 11/17/2023 | No | ||||
| 2023-10-09-24-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/18/2023 | 11/17/2023 | No | ||||
| 2023-10-09-24-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Jacob Bailey, CT D08 - Fontana Southern Regional Laboratory | 11/17/2023 | 11/17/2023 | No | ||||
| 2023-10-09-24-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 11/17/2023 | 11/17/2023 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2023-10-09-24-1 AASHTO T27-14
DIME Test ID: 2023-10-09-24-2 AASHTO T84-14
DIME Test ID: 2023-10-09-24-3 AASHTO T85-13
DIME Test ID: 2023-10-09-24-4 AASHTO T96-02r10
DIME Test ID: 2023-10-09-24-5 AASHTO T176-08
DIME Test ID: 2023-10-09-24-6 AASHTO T304-11
DIME Test ID: 2023-10-09-24-7 AASHTO T335-09r13
DIME Test ID: 2023-10-09-24-8 ASTM D4791-10