DIME - Sample Record for DIME Sample ID 2023-07-21-55

DIME » All Projects » Project - DEA: 061E5604 » Sample 2023-07-21-55 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Hot Mix Asphalt Laboratory

DIME Sample ID 2023-07-21-55

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 995048 DEA: 061E5604 EFIS: 0622000066
DIST-CO-RTE-PM	06-FRE-198-21.2/22.7
Award Date	01/05/2023
Closeout Date	11/16/2023
Work Description	Cold plane existing asphalt pavement and place RHMA.
Location Description	Not set
QA Service Level	1 (Verified on 08/04/2023)

Sample Information

Sample Taken Date	07/21/2023	Sample Unique Key	55
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/29/2023
Sample type	Dispute Resolution	A brief description of the sample	1/2" Aggregate
The quantity of what the sample constitutes	4 Bags	From where was the sample collected	Source
First name of sampler or witnessed by	A.	Last name of sampler or witnessed by	M.
Title of sampler		Telephone number of sampler
Laboratory sample identification	23-JFMDISP-167	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite Colinga	Transportation Laboratory (TL) Number	C027842
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-10-0005
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	HMA Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2023-07-21-55-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	08/31/2023	Bang Nguyen	Yes	09/01/2023
2023-07-21-55-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/07/2023	Bang Nguyen	Yes	09/08/2023	Bulk specific gravity (SSD) of fine aggregate, Bulk specific gravity of fine aggregate, Apparent specific gravity of fine aggregate, Apparent specific gravity of supplemental fines, Absorption of fine aggregate
2023-07-21-55-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/07/2023	Bang Nguyen	Yes	09/08/2023	Bulk Specific Gravity (Oven Dry) of Coarse Aggregate-Absorption of Coarse Aggregate.
2023-07-21-55-4	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/01/2023	Bang Nguyen	Yes	09/08/2023	Sand equivalent (min)
2023-07-21-55-5	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/05/2023	Bang Nguyen	Yes	09/08/2023	Durability Procedure "A" Coarse Aggregate and Procedure "B" Fine Aggregate.
2023-07-21-55-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/07/2023	Bang Nguyen	Yes	09/08/2023	Method A
2023-07-21-55-7	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/07/2023	Bang Nguyen	Yes	09/08/2023	Los Angeles Rattler, Loss at 100 and 500 Rev.
2023-07-21-55-8	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/07/2023	Bang Nguyen	Yes	09/08/2023	Crushed particles, coarse aggregate One fractured face and Crushed particles, coarse aggregate Two fractured faces - Method 1 Crushed particles, fine aggregate (Passing No. 4 sieve and retained on No. 8 sieve) One fractured face - Method 2
2023-07-21-55-9	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory	09/07/2023	Bang Nguyen	Yes	09/08/2023	Flat and elongated particles (% by mass at 5:1)

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-07-21-55-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-07-21-55-2 AASHTO T84-14 (Verified)
DIME Test ID: 2023-07-21-55-3 AASHTO T85-13 (Verified)
DIME Test ID: 2023-07-21-55-4 AASHTO T176-08 (Verified)
DIME Test ID: 2023-07-21-55-5 AASHTO T210-15 (Verified)
DIME Test ID: 2023-07-21-55-6 AASHTO T304-11 (Verified)
DIME Test ID: 2023-07-21-55-7 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-07-21-55-8 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-07-21-55-9 ASTM D4791-10 (Verified)