DIME - Sample Record for DIME Sample ID 2023-06-12-26

DIME » All Projects » Project - DEA: 07322604 » Sample 2023-06-12-26 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2023-06-12-26

Project Information

Project Identifiers	Project ID: 993607 DEA: 07322604 EFIS: 0716000057
DIST-CO-RTE-PM	07-LA-210-R41.3/R44.6
Award Date	05/10/2022
Closeout Date	03/13/2025
Work Description	CONSTRUCT POLLUTION INFILTRATION AREAS AND AUSTIN VAULT SAND FILTER.
Location Description	LOS ANGELES COUNTY IN GLENDORA AT VARIOUS LOCATIONS FROM 0.2 MILE EAST OF BARRANCA AVENUE OVERCROSSING TO 0.1 MILE WEST OF AMELIA AVENUE UNDERCROSSING
QA Service Level	1 (Verified on 05/11/2022)

Sample Information

Sample Taken Date	06/12/2023	Sample Unique Key	26
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/15/2023
Sample type	Verification	A brief description of the sample	PSUE 3/4" HMA-A-SP R15 0.5% LAS
The quantity of what the sample constitutes	4 Bags Of Agg., 2 Bags Rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Jons	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0318A-23	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials-Irwindale	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Vulcan Materials-Irwindale
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	220831A IRW LTR	Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2023-06-12-26-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain/Ali Rehman, CT D08 - Fontana Southern Regional Laboratory	06/18/2023	08/02/2023	Yes	09/12/2023	Combined Virgin Aggregate Gradation	Public - Test Data Visible
2023-06-12-26-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	06/19/2023	08/02/2023	Yes	09/12/2023		Public - Test Data Visible
2023-06-12-26-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	06/17/2023	08/02/2023	Yes	09/12/2023		Public - Test Data Visible
2023-06-12-26-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	06/21/2023	08/02/2023	Yes	09/12/2023		Public - Test Data Visible
2023-06-12-26-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	M.Landaverde, CT D08 - Fontana Southern Regional Laboratory	06/20/2023	08/02/2023	Yes	09/12/2023		Public - Test Data Visible
2023-06-12-26-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/21/2023	08/02/2023	Yes	09/12/2023		Public - Test Data Visible
2023-06-12-26-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/21/2023	08/02/2023	Yes	09/12/2023		Public - Test Data Visible
2023-06-12-26-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/21/2023	08/02/2023	Yes	09/12/2023		Public - Test Data Visible
2023-06-12-26-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/21/2023	08/02/2023	Yes	09/12/2023	Rap Gradation After Ignition	Public - Test Data Visible
2023-06-12-26-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain/David Padilla, CT D08 - Fontana Southern Regional Laboratory	06/21/2023	08/02/2023	Yes	09/12/2023	Comb. Virgin Agg. Gradation W/Rap Gradation Correlation Factors	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2023-06-12-26-1 AASHTO T27-14 (Verified)
DIME Test ID: 2023-06-12-26-2 AASHTO T84-14 (Verified)
DIME Test ID: 2023-06-12-26-3 AASHTO T85-13 (Verified)
DIME Test ID: 2023-06-12-26-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2023-06-12-26-5 AASHTO T176-08 (Verified)
DIME Test ID: 2023-06-12-26-6 AASHTO T304-11 (Verified)
DIME Test ID: 2023-06-12-26-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2023-06-12-26-8 ASTM D4791-10 (Verified)
DIME Test ID: 2023-06-12-26-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2023-06-12-26-10 CTM 202-November 2011 (Verified)