Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2023-02-16-38
Project Information
Project Identifiers | Project ID: 993608 DEA: 081H8204 EFIS: 0817000138 |
---|---|
DIST-CO-RTE-PM | 08-SBD-15,138-R21.6,R14.8/R15.1 |
Award Date | 08/26/2022 |
Closeout Date | 03/28/2024 |
Work Description | SIGNAL AND LIGHTING SYSTEM, HMA, JPCP, AND ROADWAY EXCAVATION. |
Location Description | SAN BERNARDINO COUNTY IN PHELAN ON ROUTE 138 FROM 0.3 MILE WEST OF ROUTE 138/15 SEPARATION TO ROUTE 138/15 SEPARATION AND ON ROUTE 15 SOUTHBOUND EXIT RAMP AT ROUTE 138 |
QA Service Level | 1 (Verified on 11/16/2022) |
Sample Information
Sample Taken Date | 02/16/2023 | Sample Unique Key | 38 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/02/2023 |
Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R15 0.75% LAS |
The quantity of what the sample constitutes | 12 Bags Of Aggregate, 3 Bags of Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Lucero |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0165A-23 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Materials-Oro Grande | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0022, 91-33-0046 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials- Oro Grande | |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | 224112 ORO SJR | Lot number | |
Sublot number | Aggregate Mix Number |
Submitted Tests
DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
---|---|---|---|---|---|---|---|---|
2023-02-16-38-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/Zaid. A, CT D08 - Fontana Southern Regional Laboratory | 03/14/2023 | Satish Jain | No | Comb. Virgin Aggregate Gradation | Info | |
2023-02-16-38-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 03/07/2023 | Satish Jain | No | Info | ||
2023-02-16-38-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Seige M, CT D08 - Fontana Southern Regional Laboratory | 03/07/2023 | Satish Jain | No | Info | ||
2023-02-16-38-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Dadid Padilla, CT D08 - Fontana Southern Regional Laboratory | 03/08/2023 | Satish Jain | No | Info | ||
2023-02-16-38-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Zaid.A, CT D08 - Fontana Southern Regional Laboratory | 03/07/2023 | Satish Jain | No | Info | ||
2023-02-16-38-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 03/12/2023 | Satish Jain | No | Info | ||
2023-02-16-38-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 03/12/2023 | Satish Jain | No | Info | ||
2023-02-16-38-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 03/12/2023 | Satish Jain | No | Info | ||
2023-02-16-38-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 03/08/2023 | Satish Jain | No | Rap Gradation After Ignition | Info | |
2023-02-16-38-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/Zaid. A, CT D08 - Fontana Southern Regional Laboratory | 03/15/2023 | Satish Jain | No | Comb. Virgin Agg. Gradation W/Rap Gradation Correlation factors | Info |
Sample File Attachments
File Name | Extension | Date Uploaded | Actions |
---|---|---|---|
No results found. |
Test File Attachments
DIME Test ID: 2023-02-16-38-1 AASHTO T27-14
DIME Test ID: 2023-02-16-38-2 AASHTO T84-14
DIME Test ID: 2023-02-16-38-3 AASHTO T85-13
DIME Test ID: 2023-02-16-38-4 AASHTO T96-02r10
DIME Test ID: 2023-02-16-38-5 AASHTO T176-08
DIME Test ID: 2023-02-16-38-6 AASHTO T304-11
DIME Test ID: 2023-02-16-38-7 AASHTO T335-09r13
DIME Test ID: 2023-02-16-38-8 ASTM D4791-10
DIME Test ID: 2023-02-16-38-9 CTM 202-November 2011
DIME Test ID: 2023-02-16-38-10 CTM 202-November 2011