Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2022-10-03-32
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 993530 DEA: 120S8604 EFIS: 1221000055 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-39-0.0/3.2 |
| Award Date | 03/08/2022 |
| Closeout Date | 05/02/2023 |
| Work Description | COLD PLANE AC PAVEMENT AND PLACE RHMA. |
| Location Description | ORANGE COUNTY IN HUNTINGTON BEACH FROM ROUTE 1 TO ELLIS AVENUE/MAIN STREET |
| QA Service Level | 1 (Verified on 01/25/2022) |
Sample Information
| Sample Taken Date | 10/03/2022 | Sample Unique Key | 32 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/06/2022 |
| Sample type | Verification | A brief description of the sample | PSUE 1/2" RWMA-G-SP, 0.35% EVOTHERM |
| The quantity of what the sample constitutes | 4 Bags Aggregate | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Sam | Last name of sampler or witnessed by | Jamyari |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0677G-22 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | All American Asphalt-Irvine | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | 108836 | A detailed description of where the material sample was collected | Belt Cut at All American Irvine Plant |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2022-10-03-32-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/ Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 10/08/2022 | 10/27/2022 | No | Combined Virgin Aggregate Gradation | |||
| 2022-10-03-32-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 10/08/2022 | 10/27/2022 | No | ||||
| 2022-10-03-32-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 10/08/2022 | 10/27/2022 | No | ||||
| 2022-10-03-32-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 10/10/2022 | 10/27/2022 | No | ||||
| 2022-10-03-32-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 10/11/2022 | 10/27/2022 | No | ||||
| 2022-10-03-32-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/08/2022 | 10/27/2022 | No | ||||
| 2022-10-03-32-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/08/2022 | 10/27/2022 | No | ||||
| 2022-10-03-32-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 10/08/2022 | 10/27/2022 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-10-03-32-1 AASHTO T27-14
DIME Test ID: 2022-10-03-32-2 AASHTO T84-14
DIME Test ID: 2022-10-03-32-3 AASHTO T85-13
DIME Test ID: 2022-10-03-32-4 AASHTO T96-02r10
DIME Test ID: 2022-10-03-32-5 AASHTO T176-08
DIME Test ID: 2022-10-03-32-6 AASHTO T304-11
DIME Test ID: 2022-10-03-32-7 AASHTO T335-09r13
DIME Test ID: 2022-10-03-32-8 ASTM D4791-10