DIME - Sample Record for DIME Sample ID 2022-09-07-67

DIME » All Projects » Project - DEA: 022J3904 » Sample 2022-09-07-67 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2022-09-07-67

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 993299 DEA: 022J3904 EFIS: 0221000073
DIST-CO-RTE-PM	02-SHA-44-45.5/51.6
Award Date	11/16/2021
Closeout Date	11/23/2022
Work Description	HMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING.
Location Description	SHASTA COUNTY NEAR VIOLA FROM 3.0 MILES EAST OF DEER FLAT ROAD TO 0.5 MILE EAST OF BRIDGE CREEK ROAD
QA Service Level	1 (Verified on 10/18/2021)

Sample Information

Sample Taken Date	09/07/2022	Sample Unique Key	67
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/07/2022
Sample type	Department Acceptance	A brief description of the sample	16 boxes of Lime Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP and virgin PG 58-34 M from Valero – Benicia
The quantity of what the sample constitutes	Production Start-Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	JD	Last name of sampler or witnessed by	Atkinson
Title of sampler		Telephone number of sampler
Laboratory sample identification	D79152	Linked DIME Sample ID
The fabricator/manufacturer/facility name	J.F. Shea Construction – Fawndale Rock and Asphalt (Redding, CA)	Transportation Laboratory (TL) Number	857908
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	3/8 inch	Lot number
Sublot number		HMA Mix Number	Not set
Binder content (%)	Not set	Virgin binder PG	Not set
Design binder PG	Not set	Binder Supplier	Not set
RAP content (%)	Not set	WMA Additives	Not set
Antistrip type	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2022-09-07-67-1	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	09/08/2022	09/21/2022	Yes	09/23/2022		Public - Test Data Visible
2022-09-07-67-2	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Karen Dorado, CT D02 - Redding Northern Regional Laboratory	09/07/2022	09/21/2022	Yes	09/23/2022		Public - Test Data Visible
2022-09-07-67-3	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Colt Sweeny and Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	09/08/2022	09/21/2022	Yes	09/23/2022		Public - Test Data Visible
2022-09-07-67-4	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Colt Sweeny and Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	09/08/2022	09/21/2022	Yes	09/23/2022	VMA = 16.2%, VFA = 75.1%, DP = 1.5	Public - Test Data Visible
2022-09-07-67-5	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Colt Sweeny and Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	09/16/2022	09/21/2022	Yes	09/23/2022		Public - Test Data Visible
2022-09-07-67-6	THIS TEST HAS BEEN SUPERSEDED. AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)	Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory	09/23/2022	09/23/2022	Yes	09/23/2022	THIS TEST HAS BEEN SUPERSEDED. Coarse on the № 4 sieve.	Public - Test Data Visible
2022-09-07-67-7	AASHTO T30-19: Standard Method of Test for Mechanical Analysis of Extracted Aggregate (Mechanical Analysis)	Arthur Mills, CT D02 - Redding Northern Regional Laboratory	09/26/2022	09/27/2022	Yes	09/27/2022		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2022-09-07-67-1 AASHTO T209-12 (Verified)
DIME Test ID: 2022-09-07-67-2 AASHTO T308-10 (Verified)
DIME Test ID: 2022-09-07-67-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-09-07-67-4 AASHTO T269-14 (Verified)
DIME Test ID: 2022-09-07-67-5 AASHTO T283-14 (Verified)
DIME Test ID: 2022-09-07-67-6 AASHTO T30-19 (Verified)
DIME Test ID: 2022-09-07-67-7 AASHTO T30-19 (Verified)