DIME - Sample Record for DIME Sample ID 2022-08-22-45

DIME » All Projects » Project - DEA: 021J4904 » Sample 2022-08-22-45 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2022-08-22-45

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215367 DEA: 021J4904 EFIS: 0220000084
DIST-CO-RTE-PM	02-TEH-32-14.0/20.0
Award Date	02/02/2021
Closeout Date	04/11/2024
Work Description	PLACE HOT MIX ASPHALT (TYPE A).
Location Description	TEHAMA COUNTY ABOUT 28 MILES EAST OF FOREST RANCH FROM 1.1 MILES EAST OF DEER CREEK BRIDGE NO. 08-0068 TO 0.4 MILE WEST OF SLATE CREEK BRIDGE NO. 08-0154
QA Service Level	1 (Verified on 12/24/2020)

Sample Information

Sample Taken Date	08/22/2022	Sample Unique Key	45
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/24/2022
Sample type	Department Acceptance	A brief description of the sample	4 boxes of Lime Treated 1/2-inch Type A HMA with 24.0% RAP and virgin PG 58-22 from Albina – Klamath Falls
The quantity of what the sample constitutes	750 tons	From where was the sample collected	Job Site
First name of sampler or witnessed by	Ryan	Last name of sampler or witnessed by	Sturges
Title of sampler	PEI	Telephone number of sampler
Laboratory sample identification	D79139	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Dig It Construction – Sierra Cascade Aggregate and Asphalt Products (Chester, CA)	Transportation Laboratory (TL) Number	876985
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	1/2 inch	Lot number
Sublot number		HMA Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2022-08-22-45-1	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Khue Yang and Arthur Mills, CT D02 - Redding Northern Regional Laboratory	08/25/2022	Ward Jenkins	Yes	08/26/2022
2022-08-22-45-2	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	08/25/2022	Ward Jenkins	Yes	08/26/2022
2022-08-22-45-3	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	08/25/2022	Ward Jenkins	Yes	08/26/2022
2022-08-22-45-4	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	08/26/2022	Ward Jenkins	Yes	08/26/2022

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2022-08-22-45-1 AASHTO T308-10 (Verified)
DIME Test ID: 2022-08-22-45-2 AASHTO T209-12 (Verified)
DIME Test ID: 2022-08-22-45-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-08-22-45-4 AASHTO T269-14 (Verified)