DIME - Sample Record for DIME Sample ID 2022-08-11-54

DIME » All Projects » Project - DEA: 022J4204 » Sample 2022-08-11-54 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2022-08-11-54

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 993439 DEA: 022J4204 EFIS: 0221000076
DIST-CO-RTE-PM	02-TRI-3-R26.3/29.8
Award Date	02/07/2022
Closeout Date	10/06/2022
Work Description	HMA OVERLAY AND REPLACE AC SURFACING.
Location Description	TRINITY COUNTY NEAR DOUGLAS CITY FROM BROWNS CREEK BRIDGE TO READING CREEK BRIDGE
QA Service Level	1 (Verified on 12/13/2021)

Sample Information

Sample Taken Date	08/11/2022	Sample Unique Key	54
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/11/2022
Sample type	Department Acceptance	A brief description of the sample	12 boxes of Lime Treated 3/8-inch Type A HMA with 25% RAP and virgin PG 58-34 M from Valero – Benicia
The quantity of what the sample constitutes	Production Start-Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	JD	Last name of sampler or witnessed by	Atkinson
Title of sampler		Telephone number of sampler
Laboratory sample identification	D79124	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Tullis – Northstate Asphalt (Redding, CA)	Transportation Laboratory (TL) Number	858101
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	3/8 inch	Lot number
Sublot number		HMA Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2022-08-11-54-1	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	08/15/2022	Darrell Valasek	Yes	08/26/2022
2022-08-11-54-2	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Arthur Mills, CT D02 - Redding Northern Regional Laboratory	08/12/2022	Darrell Valasek	Yes	08/26/2022
2022-08-11-54-3	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	08/15/2022	Darrell Valasek	Yes	08/26/2022
2022-08-11-54-4	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	08/15/2022	Darrell Valasek	Yes	08/26/2022	VMA = 16.2%, VFA = 73.9%, DP = 1.3
2022-08-11-54-5	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Colt Sweeny and Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	08/23/2022	Darrell Valasek	Yes	08/26/2022

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2022-08-11-54-1 AASHTO T209-12 (Verified)
DIME Test ID: 2022-08-11-54-2 AASHTO T308-10 (Verified)
DIME Test ID: 2022-08-11-54-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2022-08-11-54-4 AASHTO T269-14 (Verified)
DIME Test ID: 2022-08-11-54-5 AASHTO T283-14 (Verified)