Sample Record
Owner Lab
- CT HQ - Sacramento Asphalt Binder Laboratory
DIME Sample ID 2022-07-22-10
Project Information
| Project Identifiers | Project ID: 66669 DEA: JMF-DATA EFIS: JMF-DATA |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for storing JMF sample data |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 07/22/2022 | Sample Unique Key | 10 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/21/2022 |
| Sample type | Verification | A brief description of the sample | Cold Feed |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Akira | Last name of sampler or witnessed by | Hasegawa |
| Title of sampler | Not set | Telephone number of sampler | Not set |
| Laboratory sample identification | Not set | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | Syar Lake Herman | Transportation Laboratory (TL) Number | Not set |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-48-0002 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
| The plant number | Not set | A detailed description of where the material sample was collected | Plant |
| Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
JMF Information
| Verification ID | JMF3513-2022-13 | Date Created | 07/22/2022 |
|---|---|---|---|
| JMF Submittal ID | JMF3511-208-2022-19 | JMF Status | Submittal Accepted for Verification |
| Producer Mix ID | 312100010-LB | Authorized Date | N/A |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2022-07-22-10-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Akira Hasegawa, CT HQ - Sacramento Asphalt Binder Laboratory | 07/22/2022 | 07/22/2022 | No | Submitted from JMF - Akira Hasegawa | |||
| 2022-07-22-10-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Akira Hasegawa, CT HQ - Sacramento Asphalt Binder Laboratory | 07/22/2022 | 07/22/2022 | No | Submitted from JMF - Akira Hasegawa | |||
| 2022-07-22-10-3 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Akira Hasegawa, CT HQ - Sacramento Asphalt Binder Laboratory | 07/22/2022 | 07/22/2022 | No | Submitted from JMF - Akira Hasegawa | |||
| 2022-07-22-10-4 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Akira Hasegawa, CT HQ - Sacramento Asphalt Binder Laboratory | 07/22/2022 | 07/22/2022 | No | Submitted from JMF - Akira Hasegawa | |||
| 2022-07-22-10-5 | CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index) | Akira Hasegawa, CT HQ - Sacramento Asphalt Binder Laboratory | 07/22/2022 | 07/22/2022 | No | Submitted from JMF - Akira Hasegawa | |||
| 2022-07-22-10-6 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Akira Hasegawa, CT HQ - Sacramento Asphalt Binder Laboratory | 07/22/2022 | 07/22/2022 | No | Submitted from JMF - Akira Hasegawa | |||
| 2022-07-22-10-7 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Akira Hasegawa, CT HQ - Sacramento Asphalt Binder Laboratory | 07/22/2022 | 07/22/2022 | No | Submitted from JMF - Akira Hasegawa |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-07-22-10-1 AASHTO T335-09r13
DIME Test ID: 2022-07-22-10-2 AASHTO T96-02r10
DIME Test ID: 2022-07-22-10-3 AASHTO T176-08
DIME Test ID: 2022-07-22-10-4 AASHTO T304-11
DIME Test ID: 2022-07-22-10-5 CTM 204-June 2010
DIME Test ID: 2022-07-22-10-6 AASHTO T85-13
DIME Test ID: 2022-07-22-10-7 AASHTO T84-14
