Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2015-02-10-1
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 209511 DEA: 080Q7403 EFIS: 0800020456 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-15.4/30.8 |
| Award Date | 10/29/2013 |
| Closeout Date | Not set |
| Work Description | Design Build project provides pavement rehabilitation (including ramps) on I-15 near Cajon Pass, CA. |
| Location Description | On I-15 from 0.4 mile north of Kenwood Avenue to 0.3 mile south of West Hesperia OH |
| QA Service Level | 1 (Verified on 04/03/2014) |
Sample Information
| Sample Taken Date | 02/10/2015 | Sample Unique Key | 1 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/12/2015 |
| Sample type | Annual Source Testing | A brief description of the sample | One inch rock |
| The quantity of what the sample constitutes | 6 Bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Jeff | Last name of sampler or witnessed by | Lopez |
| Title of sampler | QC Manager | Telephone number of sampler | Unknown |
| Laboratory sample identification | 5016B | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Cemex Redlands | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91 36 0068 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2015-02-10-1-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 02/17/2015 | No | |||||
| 2015-02-10-1-2 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Farzin Farah, CT D08 - Fontana Southern Regional Laboratory | 02/18/2015 | No | |||||
| 2015-02-10-1-3 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Nader Rashidi, CT D08 - Fontana Southern Regional Laboratory | 02/18/2015 | No | |||||
| 2015-02-10-1-4 | CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | Nemencio Daof, CT D08 - Fontana Southern Regional Laboratory | 03/04/2015 | No | |||||
| 2015-02-10-1-5 | CTM 227-June 2012: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory | 02/13/2015 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2015-02-10-1-1 CTM 202-November 2011
DIME Test ID: 2015-02-10-1-2 CTM 206-October 2011
DIME Test ID: 2015-02-10-1-3 CTM 211-May 2010
DIME Test ID: 2015-02-10-1-4 CTM 214-August 2010
DIME Test ID: 2015-02-10-1-5 CTM 227-June 2012