Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2022-03-21-12
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 215349 DEA: 081C0824 EFIS: 0816000087 |
|---|---|
| DIST-CO-RTE-PM | 08-RIV-10-R104.9/R134.2 |
| Award Date | 03/24/2021 |
| Closeout Date | Not set |
| Work Description | PLACE HMA (TYPE A), JPCP AND IMPORTED BORROW. |
| Location Description | RIVERSIDE COUNTY FROM ROUTE 10/177 SEPARATION TO 1.1 MILES WEST OF WILEY'S WELL RD OC |
| QA Service Level | 1 (Verified on 03/01/2021) |
Sample Information
| Sample Taken Date | 03/21/2022 | Sample Unique Key | 12 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/23/2022 |
| Sample type | Verification | A brief description of the sample | PSUE 3/4" HMA-A-SP- R24 1.0% Lime |
| The quantity of what the sample constitutes | 6 Bags Bin Agg., 2 Bags Combined Agg., 4 Bags Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | RMA | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0182A-22 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Fisher Sand and Gravel-Tempe | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | CM203 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | CA125 | A detailed description of where the material sample was collected | Belt Cut at Fisher Sand and Gravel |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2022-03-21-12-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 03/27/2022 | Satish Jain | Yes | 04/21/2022 | Combined L.T. Aggregate Gradation | |
| 2022-03-21-12-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 03/26/2022 | Satish Jain | Yes | 04/21/2022 | ||
| 2022-03-21-12-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 03/25/2022 | Satish Jain | Yes | 04/21/2022 | ||
| 2022-03-21-12-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 04/25/2022 | Satish Jain | Yes | 04/21/2022 | ||
| 2022-03-21-12-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 03/25/2022 | Satish Jain | Yes | 04/21/2022 | ||
| 2022-03-21-12-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 03/29/2022 | Satish Jain | Yes | 04/21/2022 | ||
| 2022-03-21-12-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 03/29/2022 | Satish Jain | Yes | 04/21/2022 | ||
| 2022-03-21-12-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 03/29/2022 | Satish Jain | Yes | 04/21/2022 | ||
| 2022-03-21-12-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | David Padilla, CT D08 - Fontana Southern Regional Laboratory | 03/29/2022 | Satish Jain | Yes | 04/21/2022 | Rap Gradation After Ignition | |
| 2022-03-21-12-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 03/29/2022 | Satish Jain | No | Combined Virgin Aggregate Gradation /W Rap Gradation Correlation Factors | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-03-21-12-1 AASHTO T27-14 (Verified)
DIME Test ID: 2022-03-21-12-2 AASHTO T84-14 (Verified)
DIME Test ID: 2022-03-21-12-3 AASHTO T85-13 (Verified)
DIME Test ID: 2022-03-21-12-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2022-03-21-12-5 AASHTO T176-08 (Verified)
DIME Test ID: 2022-03-21-12-6 AASHTO T304-11 (Verified)
DIME Test ID: 2022-03-21-12-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2022-03-21-12-8 ASTM D4791-10 (Verified)
DIME Test ID: 2022-03-21-12-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2022-03-21-12-10 CTM 202-November 2011