DIME - Sample Record for DIME Sample ID 2022-03-09-15

DIME » All Projects » Project - DEA: 080K1224 » Sample 2022-03-09-15 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2022-03-09-15

Project Information

Project Identifiers	Project ID: 214486 DEA: 080K1224 EFIS: 0815000244
DIST-CO-RTE-PM	08-SBD-15-R28.6/37.5
Award Date	09/24/2021
Closeout Date	11/03/2025
Work Description	REHBILIATATE EXISTING MAINLINE AND RAMP PAVEMENT
Location Description	SAN BERNARDINO COUNTY IN HESPERIA AND VICTORVILLE FROM OAK HILL ROAD OVERCROSSING TO 0.1 MILE SOUTH OF BEAR VALLEY ROAD OVERCROSSING
QA Service Level	1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date	03/09/2022	Sample Unique Key	15
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/15/2022
Sample type	Verification	A brief description of the sample	JMF 1'' HMA-A-SP R25 1.0% LSM
The quantity of what the sample constitutes	4 Bags L.T. Agg., 2 Bags Rap, 10 Bags Virgin Agg.	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Blue Diamond	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0165A-22	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Blue Diamond-Victorville	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0046, 91-36-0106
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number	300222 WM R25	A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2022-03-09-15-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Larry Diaz/Md Tarafdar, CT D08 - Fontana Southern Regional Laboratory	03/18/2022	04/06/2022	Yes	04/21/2022	Combined L.T. Aggregate Gradation	Public - Test Data Visible
2022-03-09-15-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	03/19/2022	04/06/2022	Yes	04/21/2022		Public - Test Data Visible
2022-03-09-15-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	03/19/2022	04/06/2022	Yes	04/21/2022		Public - Test Data Visible
2022-03-09-15-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	03/22/2022	04/06/2022	Yes	04/21/2022		Public - Test Data Visible
2022-03-09-15-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	03/23/2022	04/06/2022	Yes	04/21/2022		Public - Test Data Visible
2022-03-09-15-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	03/27/2022	04/06/2022	Yes	04/21/2022		Public - Test Data Visible
2022-03-09-15-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	03/27/2022	04/06/2022	Yes	04/21/2022		Public - Test Data Visible
2022-03-09-15-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	03/27/2022	04/06/2022	Yes	04/21/2022		Public - Test Data Visible
2022-03-09-15-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Amir Behjati, CT D08 - Fontana Southern Regional Laboratory	03/29/2022	04/06/2022	Yes	04/21/2022	Rap Gradation After Ignition	Public - Test Data Visible
2022-03-09-15-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Larry Diaz/Md Tarafdar, CT D08 - Fontana Southern Regional Laboratory	03/29/2022	04/06/2022	Yes	04/21/2022	Combined L.T. Aggregate Gradation W/ Rap Gradation Correlation Factors	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2022-03-09-15-1 AASHTO T27-14 (Verified)
DIME Test ID: 2022-03-09-15-2 AASHTO T84-14 (Verified)
DIME Test ID: 2022-03-09-15-3 AASHTO T85-13 (Verified)
DIME Test ID: 2022-03-09-15-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2022-03-09-15-5 AASHTO T176-08 (Verified)
DIME Test ID: 2022-03-09-15-6 AASHTO T304-11 (Verified)
DIME Test ID: 2022-03-09-15-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2022-03-09-15-8 ASTM D4791-10 (Verified)
DIME Test ID: 2022-03-09-15-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2022-03-09-15-10 CTM 202-November 2011 (Verified)