Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2014-10-23-2
Project Information
| Project Identifiers | Project ID: 3995 DEA: 072332A4 EFIS: 0700000390 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-R46.3/R50.0 |
| Award Date | 02/27/2012 |
| Closeout Date | 06/02/2015 |
| Work Description | WIDEN ROADWAY AND BRIDGES WITH PCC AND CONSTRUCT RETAINING WALLS. |
| Location Description | LOS ANGELES COUNTY IN AND NEAR SANTA CLARITA FROM 0.3 MILE SOUTH OF WELDON CANYON OVERCROSSING TO 0.4 MILE SOUTH OF PICO CANYON ROAD/LYONS AVENUE OVERCROSSING |
| QA Service Level | 1 (Verified on 04/23/2012) |
Sample Information
| Sample Taken Date | 10/23/2014 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/24/2014 |
| Sample type | Annual Source Testing | A brief description of the sample | Three eighths inch PCC Aggregates |
| The quantity of what the sample constitutes | 6 Bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | 4285B | Linked DIME Sample ID | 0 |
| The fabricator/manufacturer/facility name | Vulcan Materials Palmdale | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | SMARA 91 19 0020 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/8 inch |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2014-10-23-2-1 | CTM 202-Oct 2014: Method of Test for Determining Sieve Analysis of Fine and Coarse Aggregates | Vance Olsen, CT D08 - Fontana Southern Regional Laboratory | 10/27/2014 | No | |||||
| 2014-10-23-2-2 | CTM 206-October 2011: Method of Test for Specific Gravity and Absorption of Coarse Aggregate | Vance Olsen, CT D08 - Fontana Southern Regional Laboratory | 10/28/2014 | No | |||||
| 2014-10-23-2-3 | CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine | Vance Olsen, CT D08 - Fontana Southern Regional Laboratory | 10/28/2014 | No | |||||
| 2014-10-23-2-4 | CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate | Nemencio Daof, CT D08 - Fontana Southern Regional Laboratory | 11/07/2014 | No | |||||
| 2014-10-23-2-5 | CTM 227-June 2012: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness) | Vance Olsen, CT D08 - Fontana Southern Regional Laboratory | 10/28/2014 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2014-10-23-2-1 CTM 202-Oct 2014
DIME Test ID: 2014-10-23-2-2 CTM 206-October 2011
DIME Test ID: 2014-10-23-2-3 CTM 211-May 2010
DIME Test ID: 2014-10-23-2-4 CTM 214-August 2010
DIME Test ID: 2014-10-23-2-5 CTM 227-June 2012
