DIME » All Projects » Project - DEA: 034H6904 » Sample 2021-11-22-5 » Sample Details

Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2021-11-22-5

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213568
DEA: 034H6904
EFIS: 0319000026
DIST-CO-RTE-PM03-SAC,SAC/SOL-12-0-0.4/26.3-26.4, 0.0-0.4/26.3-26.4
Award Date08/13/2018
Closeout Date08/28/2023
Work DescriptionMajor Damage Restoration (Emergency Opening)
Location DescriptionNot set
QA Service Level1 (Verified on 08/24/2018)

Sample Information

Sample Taken Date11/22/2021 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/03/2021
Sample typeQuality Assurance A brief description of the sampleF1554 Grade 55 HDG Anchor Bolts
The quantity of what the sample constitutes44ea 5/8" x 14"; 24ea 3/4" x 14"; 80 ea 1" x 18"; 92 ea 1" x 17" From where was the sample collectedFabricator
First name of sampler or witnessed byGreg Last name of sampler or witnessed byThompson
Title of samplerAssociate Steel Inspector Telephone number of sampler510-376-7155
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameXKT Engineering Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB9-131-21 Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s) 3800015418 3800021442 3800022774 Nut Mfg. Lot Number(s)458875B 450605C 455386A
Washer Mfg. Lot Number(s)12875 14849 D9793 Bolt SpecificationF1554 HDG
Bolt Length(s)5/8x14,3/4x14,1x17and 1x18 Nut SpecificationF563 DH
Washer SpecificationF436 type 1 FinishHDG
Diameter/Size58", 3/4", 1" Bolt Mfg. Lot Number5/8- 380001541820 3/4- 380002144220 1- 3800
Rocap Test Requirement(s)no Lubricant Requirements(s)yes
Washer Inner Diameter(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2021-11-22-5-1ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021F1554 Full Length TensilePublic - Test Data Visible
2021-11-22-5-2ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021F1554 Full Length TensilePublic - Test Data Visible
2021-11-22-5-3ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021F1554 Full Length TensilePublic - Test Data Visible
2021-11-22-5-4ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021F1554 Full Length TensilePublic - Test Data Visible
2021-11-22-5-5ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021F1554 Full Length TensilePublic - Test Data Visible
2021-11-22-5-6ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021Nut Proof LoadPublic - Test Data Visible
2021-11-22-5-7ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021Nut Proof LoadPublic - Test Data Visible
2021-11-22-5-8ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)spaine, CT HQ - Sacramento Structural Materials Testing Laboratory12/17/202112/17/2021
Yes
12/20/2021Nut Proof LoadPublic - Test Data Visible
2021-11-22-5-9ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/20/2021
Yes
12/20/2021Public - Test Data Visible
2021-11-22-5-10ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory12/20/2021
Yes
12/20/2021Public - Test Data Visible
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-11-22-5-1 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-2 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-3 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-4 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-5 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-6 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-7 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-8 ASTM F606-21 (Verified)
DIME Test ID: 2021-11-22-5-9 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-10 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-11 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-12 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-13 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-14 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-15 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-16 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-17 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-18 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-19 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-20 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-21 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-22 ASME B1.2-83r17 (Verified)
DIME Test ID: 2021-11-22-5-23 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-24 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-25 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-26 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-27 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-28 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-29 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-30 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-31 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-32 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-33 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-34 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-35 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-36 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-37 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-38 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-39 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-40 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-41 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-42 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-43 ASTM E18-20 (Verified)
DIME Test ID: 2021-11-22-5-44 ASTM E18-20 (Verified)
DIME Test ID: 2021-11-22-5-45 ASTM E18-20 (Verified)
DIME Test ID: 2021-11-22-5-46 ASTM E18-20 (Verified)
DIME Test ID: 2021-11-22-5-47 ASTM E18-20 (Verified)
DIME Test ID: 2021-11-22-5-48 ASTM E18-20 (Verified)
DIME Test ID: 2021-11-22-5-49 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-50 ASTM B499-09r21 (Verified)
DIME Test ID: 2021-11-22-5-51 ASTM B499-09r21 (Verified)