DIME - Sample Record for DIME Sample ID 2021-09-16-31

DIME » All Projects » Project - DEA: 081L6804 » Sample 2021-09-16-31 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-09-16-31

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215587 DEA: 081L6804 EFIS: 0820000138
DIST-CO-RTE-PM	08-RIV-91,15-7.5/13.4,8.2/23.9
Award Date	04/30/2021
Closeout Date	08/16/2023
Work Description	SLAB REPLACEMENT, PLACE SLURRY SEAL AND REPLACE AC SURFACING.
Location Description	RIVERSIDE COUNTY IN AND NEAR CORONA AND MURRIETA ON ROUTE 91 FROM ROUTE 15/91 SEPARATION TO 0.4 MILE EAST OF TYLER STREET AND ON ROUTE 15 FROM 1.5 MILES NORTH OF WINCHESTER ROAD TO NICHOLS ROAD
QA Service Level	1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date	09/16/2021	Sample Unique Key	31
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/28/2021
Sample type	Verification	A brief description of the sample	JMF 3/4" WMA-A-SP R15 0.4% EVO
The quantity of what the sample constitutes	4 Bags Combined Agg., 2 Bags Rap	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	RMA	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0554A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt Corona	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample	3/4 WMA-A-SP R15	The fabricator/manufacturer designation for the sample
The plant number	103793	A detailed description of where the material sample was collected	Belt Cut at All American Asphalt Corona Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Test Comments	Privacy Level
2021-09-16-31-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain/Dominic Montemayor, CT D08 - Fontana Southern Regional Laboratory	09/30/2021	Yes	10/06/2021	Combined Virgin Aggregate Gradation	Public - Test Data Visible
2021-09-16-31-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	10/01/2021	Yes	10/06/2021		Public - Test Data Visible
2021-09-16-31-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	10/01/2021	Yes	10/06/2021		Public - Test Data Visible
2021-09-16-31-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory	10/04/2021	Yes	10/06/2021		Public - Test Data Visible
2021-09-16-31-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory	10/05/2021	Yes	10/06/2021		Public - Test Data Visible
2021-09-16-31-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	10/05/2021	Yes	10/06/2021		Public - Test Data Visible
2021-09-16-31-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	10/05/2021	Yes	10/06/2021		Public - Test Data Visible
2021-09-16-31-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	10/05/2021	Yes	10/06/2021		Public - Test Data Visible
2021-09-16-31-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	10/05/2021	Yes	10/06/2021	Rap Gradation After Ignition	Public - Test Data Visible
2021-09-16-31-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain/Dominic Montemayor, CT D08 - Fontana Southern Regional Laboratory	10/05/2021	Yes	10/06/2021	Combined RAP/Virgin Aggregate Gradation W/Correlation Factors Applied	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-09-16-31-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-09-16-31-2 AASHTO T84-14 (Verified)
DIME Test ID: 2021-09-16-31-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-09-16-31-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-09-16-31-5 AASHTO T176-08 (Verified)
DIME Test ID: 2021-09-16-31-6 AASHTO T304-11 (Verified)
DIME Test ID: 2021-09-16-31-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-09-16-31-8 ASTM D4791-10 (Verified)
DIME Test ID: 2021-09-16-31-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-09-16-31-10 CTM 202-November 2011 (Verified)