DIME » All Projects » Project - DEA: 030A5704 » Sample 2021-05-11-36 » Sample Details

Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2021-05-11-36

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214426
DEA: 030A5704
EFIS: 0300020593
DIST-CO-RTE-PM03-YUB-20-13.3/R18.2
Award Date01/02/2020
Closeout Date07/15/2025
Work DescriptionBrowns Valley Rehab: CONSTRUCT BRIDGE, REALIGN CURVE, WIDEN SHOULDERS AND CULVERT WORK.
Location DescriptionYUBA COUNTY FROM MARYSVILLE ROAD TO THE YUBA RIVER BRIDGE
QA Service Level1 (Verified on 10/23/2019)

Sample Information

Sample Taken Date05/11/2021 Sample Unique Key36
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/12/2021
Sample typeVerification A brief description of the sample1/2" untreated Virgin Aggregate
The quantity of what the sample constitutes3 bags From where was the sample collectedSupplier
First name of sampler or witnessed byKen Last name of sampler or witnessed byMcHugh
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameTeichert Hallwood Drum Plant Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-58-0006::HALLWOOD PLANT
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedbelt feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-74 Date Created08/27/2021
JMF Submittal IDJMF3511-23-2021-92 JMF StatusSubmittal Accepted for Verification
Producer Mix ID309-40442407-M Authorized DateN/A

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2021-05-11-36-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory07/13/2021
Yes
08/27/2021JMF 21-028 Public - Test Data Visible
2021-05-11-36-2CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory07/12/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible
2021-05-11-36-3AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory07/16/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible
2021-05-11-36-4AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory07/14/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible
2021-05-11-36-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory07/14/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible
2021-05-11-36-6AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory07/14/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible
2021-05-11-36-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory07/14/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible
2021-05-11-36-8AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory07/14/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible
2021-05-11-36-9AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory07/14/2021
Yes
08/27/2021JMF 21-028Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-05-11-36-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-05-11-36-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-05-11-36-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-05-11-36-4 AASHTO T85-13 (Verified)
DIME Test ID: 2021-05-11-36-5 AASHTO T84-14 (Verified)
DIME Test ID: 2021-05-11-36-6 AASHTO T304-11 (Verified)
DIME Test ID: 2021-05-11-36-7 ASTM D4791-10 (Verified)
DIME Test ID: 2021-05-11-36-8 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-05-11-36-9 AASHTO T176-08 (Verified)