DIME - Sample Record for DIME Sample ID 2021-04-28-38

DIME » All Projects » Project - DEA: 031E0604 » Sample 2021-04-28-38 » Sample Details

Sample Record

Owner Lab

CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2021-04-28-38

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212914 DEA: 031E0604 EFIS: 0312000068
DIST-CO-RTE-PM	03-YUB-70-15.5/16.5
Award Date	07/31/2019
Closeout Date	08/30/2023
Work Description	SIMMERLY SLOUGH BRIDGE REPLACEMENT BR 16-0019 WITH BR 16-0055.
Location Description	NEAR MARYSVILLE, FROM 0.1 MILE NORTH OF BINNEY JUNCTION UNDERPASS TO 0.3 MILE NORTH OF LAURELLEN ROAD, AT SIMMERLY SLOUGH BRIDGE BR 16-0019.
QA Service Level	1 (Verified on 08/22/2019)

Sample Information

Sample Taken Date	04/28/2021	Sample Unique Key	38
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/10/2021
Sample type	Verification	A brief description of the sample	3/4" untreated Virgin Aggregate
The quantity of what the sample constitutes	2 bags	From where was the sample collected	Supplier
First name of sampler or witnessed by	Ken	Last name of sampler or witnessed by	McHugh
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Teichert-Hallwood Drum Plant	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-58-0006::HALLWOOD PLANT
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Feed
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2021-72	Date Created	08/20/2021
JMF Submittal ID	JMF3511-23-2021-90	JMF Status	Submittal Authorized For Use
Producer Mix ID	309-40532500-P	Authorized Date	09/15/2021

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-04-28-38-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory	05/11/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-2	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	05/12/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-3	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	05/12/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-4	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	08/20/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-5	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Julian Gonzales, CT D03 - Olivehurst Northern Regional Laboratory	05/10/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-6	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	05/11/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	05/11/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-8	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	05/13/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024
2021-04-28-38-9	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Tom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory	05/12/2021	Julian Gonzales	Yes	08/20/2021	JMF 21-024

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-04-28-38-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-04-28-38-2 AASHTO T85-13 (Verified)
DIME Test ID: 2021-04-28-38-3 AASHTO T84-14 (Verified)
DIME Test ID: 2021-04-28-38-4 AASHTO T304-11 (Verified)
DIME Test ID: 2021-04-28-38-5 CTM 204-June 2010 (Verified)
DIME Test ID: 2021-04-28-38-6 ASTM D4791-10 (Verified)
DIME Test ID: 2021-04-28-38-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-04-28-38-8 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-04-28-38-9 AASHTO T176-08 (Verified)