Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-05-13-37

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212496
DEA: 024E4504
EFIS: 0200020286
DIST-CO-RTE-PM02-LAS,MOD-139,299-VAR
Award Date07/28/2020
Closeout Date08/14/2023
Work DescriptionPLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS.
Location DescriptionLASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87
QA Service Level1 (Verified on 06/06/2017)

Sample Information

Sample Taken Date05/13/2021 Sample Unique Key37
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/14/2021
Sample typeDepartment Acceptance A brief description of the sample3/4-inch Type A HMA (eq. PG 64-28 M)
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byEmilio Last name of sampler or witnessed byChavez
Title of sampler Telephone number of sampler
Laboratory sample identificationD78795 Linked DIME Sample ID
The fabricator/manufacturer/facility nameHat Creek Construction and Materials - Shaw Pit Facility - Lookout, CA Transportation Laboratory (TL) Number765845
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number
Sublot number HMA Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-05-13-37-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terry McCormick, CT D02 - Redding Northern Regional Laboratory07/16/2021Ward Jenkins
Yes
07/20/2021
2021-05-13-37-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Karen Rios Dorado, CT D02 - Redding Northern Regional Laboratory05/14/2021Ward Jenkins
Yes
07/20/2021
2021-05-13-37-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory05/17/2021Ward Jenkins
Yes
07/20/2021
2021-05-13-37-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory07/16/2021Ward Jenkins
Yes
07/20/2021VMA = 14.5, VFA = 75.4, DP = 1.4
2021-05-13-37-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Valasek, Sweeny, McCormick, CT D02 - Redding Northern Regional Laboratory05/26/2021Ward Jenkins
Yes
07/20/2021
2021-05-13-37-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory05/19/2021Ward Jenkins
Yes
07/20/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-05-13-37-1 AASHTO T308-10 (Verified)
DIME Test ID: 2021-05-13-37-2 AASHTO T209-12 (Verified)
DIME Test ID: 2021-05-13-37-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2021-05-13-37-4 AASHTO T269-14 (Verified)
DIME Test ID: 2021-05-13-37-5 AASHTO T283-14 (Verified)
DIME Test ID: 2021-05-13-37-6 AASHTO T324-14 (Verified)