DIME - Sample Record for DIME Sample ID 2021-06-15-32

DIME » All Projects » Project - DEA: 021J5204 » Sample 2021-06-15-32 » Sample Details

Sample Record

DIME Sample ID 2021-06-15-32

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215441 DEA: 021J5204 EFIS: 0220000087
DIST-CO-RTE-PM	02-MOD,SIS-139-34.0/50.7,0.0/5.0
Award Date	03/02/2021
Closeout Date	09/27/2021
Work Description	PLACE ASPHALT RUBBER BINDER CHIP SEAL & REPLACE AC SURFACING.
Location Description	MODOC AND SISKIYOU COUNTIES AT AND NEAR NEWELL FROM 3.3 MILES NORTH OF PEREZ OVERHEAD TO ROUTE 161
QA Service Level	1 (Verified on 02/01/2021)

Owner Lab

CT D02 - Redding Northern Regional Laboratory

Sample Information

Sample Taken Date	06/15/2021	Sample Unique Key	32
Date that the sample was received by the laboratory/organization performing the testing	06/16/2021	Sample type	Department Acceptance
A brief description of the sample	2 bags of Uncoated 3/8″ Aggregate for Use in ARB Chip Seal	The quantity of what the sample constitutes	One-half day to whole project
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	John
Last name of sampler or witnessed by	Carmichael	Title of sampler	Consultant
Telephone number of sampler		Laboratory sample identification	D78845
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Hat Creek Construction and Materials - Shaw Pit - Lookout, CA
Transportation Laboratory (TL) Number	990927	Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-25-0008::Shaw Pit
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Sampling Device at Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Test Comments	Privacy Level
2021-06-15-32-1	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	06/17/2021	Yes	01/11/2022		Public - Test Data Visible
2021-06-15-32-2	CTM 227-December 2014: Method of Test for Evaluating Cleanness of Coarse Aggregate (Cleanness)	Karen Dorado, CT D02 - Redding Northern Regional Laboratory	06/18/2021	Yes	01/11/2022		Public - Test Data Visible
2021-06-15-32-3	CTM 229-June 2011: Method of Test for Durability Index	Karen Dorado, CT D02 - Redding Northern Regional Laboratory	06/18/2021	Yes	01/11/2022		Public - Test Data Visible
2021-06-15-32-4	CTM 211-May 2010: Abrasion of Coarse Aggregate by Use of the Los Angeles Abrasion Testing Machine	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	06/17/2021	Yes	01/11/2022		Public - Test Data Visible
2021-06-15-32-5	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	06/17/2021	Yes	01/11/2022		Public - Test Data Visible
2021-06-15-32-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	06/17/2021	Yes	01/11/2022	Percentage of fractured, fine, 1 faced particles not determined. No. 4 x 8 comprised only 2% of the sample.	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-06-15-32-1 CTM 202-November 2011 (Verified)
DIME Test ID: 2021-06-15-32-2 CTM 227-December 2014 (Verified)
DIME Test ID: 2021-06-15-32-3 CTM 229-June 2011 (Verified)
DIME Test ID: 2021-06-15-32-4 CTM 211-May 2010 (Verified)
DIME Test ID: 2021-06-15-32-5 ASTM D4791-10 (Verified)
DIME Test ID: 2021-06-15-32-7 AASHTO T335-09r13 (Verified)