DIME » All Projects » Project - DEA: 010F4704 » Sample 2021-04-19-40 » Sample Details

Sample Record

DIME Sample ID 2021-04-19-40

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215179
DEA: 010F4704
EFIS: 0116000011
DIST-CO-RTE-PM01-HUM-299-30.7/37.7
Award Date11/19/2020
Closeout Date11/27/2023
Work DescriptionPLACE HMA & RHMA-G & CONSTRUCT SOLDIER PILE WALL.
Location DescriptionHUMBOLDT COUNTY NEAR WILLOW CREEK AT VARIOUS LOCATIONS FROM 0.1 MILE EAST OF CEDAR CREEK ROAD TO 1.1 MILES WEST OF ROUTE 96 JUNCTION
QA Service Level1 (Verified on 09/15/2020)

Owner Lab

  • CT HQ - Sacramento Aggregate Testing Laboratory

Sample Information

Sample Taken Date04/19/2021 Sample Unique Key40
Date that the sample was received by the laboratory/organization performing the testing06/08/2021 Sample typeDispute Resolution
A brief description of the sample3/4" HMA PG64-16 NO RAP The quantity of what the sample constitutes2 bags
From where was the sample collectedManufacturer First name of sampler or witnessed byna
Last name of sampler or witnessed byna Title of sampler
Telephone number of sampler Laboratory sample identification21-JMFDP-0110
Linked DIME Sample ID The fabricator/manufacturer/facility nameMercer Fraser - Willow Creek
Transportation Laboratory (TL) Number Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier Structure name
Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-12-0007
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedPlant
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2021-04-19-40-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/15/2021
Yes
06/18/2021Public - Test Data Visible
2021-04-19-40-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/16/2021
Yes
06/18/2021Crushed particles, coarse aggregate one fractured face Crushed particles, coarse aggregate two fractured faces Crushed particles, fine aggregate (Passing No. 4 sieve and retained on No. 8 sieve) one fractured facePublic - Test Data Visible
2021-04-19-40-3AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Bang Nguyen, CT HQ - Sacramento Aggregate Testing Laboratory06/21/2021
Yes
06/21/2021At 100 rev and 500 revPublic - Test Data Visible
2021-04-19-40-4AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory06/16/2021
Yes
06/18/2021Public - Test Data Visible
2021-04-19-40-5AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/15/2021
Yes
06/18/2021Method APublic - Test Data Visible
2021-04-19-40-6ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory06/17/2021
Yes
06/18/2021% by mass at 5:1Public - Test Data Visible
2021-04-19-40-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/16/2021
Yes
06/18/2021- Bulk specific gravity (oven dry) of coarse aggregate - Absorption o coarse aggregatePublic - Test Data Visible
2021-04-19-40-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory06/16/2021
Yes
06/18/2021- Bulk specific gravity (SSD) of fine aggregate - Bulk specific gravity of fine aggregate - Bulk specific gravity of fine aggregate - Apparent specific gravity of supplemental fines - Absorption of fine aggregate Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-04-19-40-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-04-19-40-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-04-19-40-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-04-19-40-4 AASHTO T176-08 (Verified)
DIME Test ID: 2021-04-19-40-5 AASHTO T304-11 (Verified)
DIME Test ID: 2021-04-19-40-6 ASTM D4791-10 (Verified)
DIME Test ID: 2021-04-19-40-7 AASHTO T85-13 (Verified)
DIME Test ID: 2021-04-19-40-8 AASHTO T84-14 (Verified)