Sample Record

Owner Lab

  • CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-05-14-26

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212496
DEA: 024E4504
EFIS: 0200020286
DIST-CO-RTE-PM02-LAS,MOD-139,299-VAR
Award Date07/28/2020
Closeout Date08/14/2023
Work DescriptionPLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS.
Location DescriptionLASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87
QA Service Level1 (Verified on 06/06/2017)

Sample Information

Sample Taken Date05/14/2021 Sample Unique Key26
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/28/2021
Sample typeDepartment Acceptance A brief description of the samplePG58-34M
The quantity of what the sample constitutes2 cans From where was the sample collectedSource
First name of sampler or witnessed byE Last name of sampler or witnessed byChavez
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameAlbina - Klamath Falls, OR Transportation Laboratory (TL) Number765848
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA SupplierHat Creek - Shaw Pit Facility
Certified Asphalt SupplierAlbina Asphalt - Klamath Falls Plant - Klamath Falls OR MultigradeNo
Multigrade TypeNot set Asphalt Binder Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-05-14-26-1AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Harish Thakur, CT HQ - Sacramento Asphalt Binder Laboratory06/02/2021Harish Thakur
Yes
06/07/2021as per 2018 standard specs
2021-05-14-26-2AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory06/02/2021Eva Torres
Yes
06/07/2021ORIG
2021-05-14-26-3AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory06/02/2021Eva Torres
Yes
06/07/2021RTFO
2021-05-14-26-4AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory06/04/2021Eva Torres
Yes
06/07/2021PAV
2021-05-14-26-5AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Ruben Macias, CT HQ - Sacramento Asphalt Binder Laboratory06/04/2021Ruben Macias
Yes
06/07/2021
2021-05-14-26-6AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory06/02/2021Eva Torres
Yes
06/07/2021Estimated G*/Sin (Delta) at 2.2 kPa is 64.8 degree, <80 max per spec.

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-05-14-26-1 AASHTO T240-17 (Verified)
DIME Test ID: 2021-05-14-26-2 AASHTO T315-16 (Verified)
DIME Test ID: 2021-05-14-26-3 AASHTO T315-16 (Verified)
DIME Test ID: 2021-05-14-26-4 AASHTO T315-16 (Verified)
DIME Test ID: 2021-05-14-26-5 AASHTO T313-19 (Verified)
DIME Test ID: 2021-05-14-26-6 AASHTO T315-16 (Verified)