DIME - Sample Record for DIME Sample ID 2021-05-14-11

DIME » All Projects » Project - DEA: 074U0404 » Sample 2021-05-14-11 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2021-05-14-11

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215300 DEA: 074U0404 EFIS: 0717000238
DIST-CO-RTE-PM	07-LA-101-31.1/35.1
Award Date	12/22/2020
Closeout Date	11/03/2021
Work Description	REPLACE ASPHALT CONCRETE DIKES AND COLD PLANE AND OVERLAY (SHOULDER).
Location Description	LOS ANGELES COUNTY IN CALABASAS AND AGOURA HILLS FROM LAS VIRGENES ROAD OVERCROSSING TO KANAN ROAD OVERCROSSING
QA Service Level	1 (Verified on 03/16/2021)

Sample Information

Sample Taken Date	05/14/2021	Sample Unique Key	11
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/19/2021
Sample type	Verification	A brief description of the sample	PSUE 1/2" RHMA-G-SP 0.5% LAS
The quantity of what the sample constitutes	6 Bags Of Aggregate	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Thomas	Last name of sampler or witnessed by	Shivers
Title of sampler		Telephone number of sampler
Laboratory sample identification	0288G-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials Sun Valley 3	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035::FISH CANYON QUARRY
The fabricator's/manufacturer's product name for the sample	1/2 RHMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	326120 SVA3 SJR	A detailed description of where the material sample was collected	Belt Cut at Vulcan Sun Valley 3
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-05-14-11-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain/Dominic Montemayor, CT D08 - Fontana Southern Regional Laboratory	05/20/2021	Satish Jain	Yes	05/26/2021	Combined Virgin Aggregate Gradation
2021-05-14-11-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/22/2021	Satish Jain	Yes	05/26/2021
2021-05-14-11-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	05/21/2021	Satish Jain	Yes	05/26/2021
2021-05-14-11-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	05/21/2021	Satish Jain	Yes	05/26/2021
2021-05-14-11-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	05/24/2021	Satish Jain	Yes	05/26/2021
2021-05-14-11-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	05/24/2021	Satish Jain	Yes	05/26/2021
2021-05-14-11-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/22/2021	Satish Jain	Yes	05/26/2021
2021-05-14-11-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/22/2021	Satish Jain	Yes	05/26/2021

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-05-14-11-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-05-14-11-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-05-14-11-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-05-14-11-4 AASHTO T84-14 (Verified)
DIME Test ID: 2021-05-14-11-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-05-14-11-6 AASHTO T176-08 (Verified)
DIME Test ID: 2021-05-14-11-7 ASTM D4791-10 (Verified)
DIME Test ID: 2021-05-14-11-8 AASHTO T304-11 (Verified)