Sample Record

Owner Lab

  • CT HQ - Sacramento Aggregate Testing Laboratory

DIME Sample ID 2021-01-25-1

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 66667
DEA: JMFPP
EFIS: 0019000043
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for submitting Sample information for JMF Prequalification Program.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date01/25/2021 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/26/2021
Sample typeVerification A brief description of the sampleBatch Plant - 4 bins - 2 bags each (3/4, 1/2, 3/8, and 1/4) plus 1 bag mineral filler
The quantity of what the sample constitutes9 bags From where was the sample collectedSupplier
First name of sampler or witnessed byIgnocencio Last name of sampler or witnessed byHerrera
Title of sampler Telephone number of sampler
Laboratory sample identification21-JFMPP-0007 Linked DIME Sample ID
The fabricator/manufacturer/facility nameSyar Industries Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-48-0002::LAKE HERMAN QUARRY
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedHot Bins
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2021-9 Date Created01/26/2021
JMF Submittal IDJMF3511-208-2021-11 JMF StatusSubmittal Authorized For Use
Producer Mix ID411101510-LB Authorized Date02/11/2021

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-01-25-1-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Bang Nguyen, CT HQ - Sacramento Aggregate Testing Laboratory02/02/2021Bang Nguyen
Yes
02/03/2021
2021-01-25-1-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory02/04/2021Bang Nguyen
Yes
02/04/2021Crushed particles, coarse aggregate One fractured face and Crushed particles, coarse aggregate Two fractured faces - Method 1 Crushed particles, fine aggregate (Passing No. 4 sieve and retained on No. 8 sieve) One fractured face - Method 2
2021-01-25-1-3AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Bang Nguyen, CT HQ - Sacramento Aggregate Testing Laboratory02/01/2021Bang Nguyen
Yes
02/03/2021Los Angeles Rattler, Loss at 100 and 500 Rev.
2021-01-25-1-4AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory02/01/2021Bang Nguyen
Yes
02/03/2021Sand equivalent (min)
2021-01-25-1-5AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory02/03/2021Bang Nguyen
Yes
02/04/2021
2021-01-25-1-7THIS TEST HAS BEEN SUPERSEDED.
AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Bang Nguyen, CT HQ - Sacramento Aggregate Testing Laboratory02/02/2021Bang Nguyen
Yes
02/03/2021THIS TEST HAS BEEN SUPERSEDED.
Bulk specific gravity (SSD) of fine aggregate, Bulk specific gravity of fine aggregate, Apparent specific gravity of fine aggregate, Apparent specific gravity of supplemental fines, Absorption of fine aggregate
2021-01-25-1-8AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory02/02/2021Bang Nguyen
Yes
02/03/2021Bulk specific gravity (oven dry) of coarse aggregate and Absorption of coarse aggregate
2021-01-25-1-9AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Ryan Kester, CT HQ - Sacramento Aggregate Testing Laboratory02/02/2021Bang Nguyen
Yes
02/04/2021Bulk specific gravity (SSD) of fine aggregate, Bulk specific gravity of fine aggregate, Apparent specific gravity of fine aggregate, Apparent specific gravity of supplemental fines, Absorption of fine aggregate
2021-01-25-1-10ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Jay Horton, CT HQ - Sacramento Aggregate Testing Laboratory02/04/2021Bang Nguyen
Yes
02/04/2021Flat and elongated particles (% by mass at 5:1)

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-01-25-1-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-01-25-1-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-01-25-1-3 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-01-25-1-4 AASHTO T176-08 (Verified)
DIME Test ID: 2021-01-25-1-5 AASHTO T304-11 (Verified)
DIME Test ID: 2021-01-25-1-7 AASHTO T84-14 (Verified)
DIME Test ID: 2021-01-25-1-8 AASHTO T85-13 (Verified)
DIME Test ID: 2021-01-25-1-9 AASHTO T84-14 (Verified)
DIME Test ID: 2021-01-25-1-10 ASTM D4791-10 (Verified)