Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-11-18-30

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214921
DEA: 09367404
EFIS: 0916000025
DIST-CO-RTE-PM09-KER-14-R4.7/R12.6
Award DateNot set
Closeout Date01/23/2023
Work DescriptionCONSTRUCT CRCP OVER EXISTING PAVEMENT AND PLACE HMA.
Location DescriptionKERN COUNTY AT AND NEAR ROSAMOND AND MOJAVE FROM 1.4 MILES SOUTH OF DAWN ROAD OVERCROSSING TO 0.5 MILE NORTH OF SILVER QUEEN ROAD OVERCROSSING
QA Service Level1 (Verified on 11/06/2020)

Sample Information

Sample Taken Date11/18/2020 Sample Unique Key30
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/10/2020
Sample typeDepartment Acceptance A brief description of the sample3/4" HMA-A-SP R25 0.8% Dry Lime
The quantity of what the sample constitutes1 Bag Coldfeed Agg., 1 Bag Combined L.T. Agg. From where was the sample collectedManufacturer
First name of sampler or witnessed byGranite Construction Company Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0691A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Construction Company Littlerock Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-19-0046, 91-19-0008
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R25 The fabricator/manufacturer designation for the sample
The plant number13554 A detailed description of where the material sample was collectedBelt Cut at Granite Littlerock Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number1
Sublot number3 Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-11-18-30-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Satish Jain/Dominic Montemayor, CT D08 - Fontana Southern Regional Laboratory12/11/2020Satish Jain
Yes
12/30/2020Combined Lime Treated Aggregate Gradation
2020-11-18-30-2AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory12/12/2020Satish Jain
Yes
12/30/2020
2020-11-18-30-3CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory12/15/2020Satish Jain
Yes
12/30/2020Rap Gradation After Ignition (Used Rap Grading From 0690-20)
2020-11-18-30-4CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesSatish Jain/Dominc Montemayor, CT D08 - Fontana Southern Regional Laboratory12/15/2020Satish Jain
Yes
12/30/2020Combined RAP/Lime Treated Aggregate Gradation W/Correlation Factors Applied

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-11-18-30-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-11-18-30-2 AASHTO T176-08 (Verified)
DIME Test ID: 2020-11-18-30-3 CTM 202-November 2011 (Verified)
DIME Test ID: 2020-11-18-30-4 CTM 202-November 2011 (Verified)