DIME » All Projects » Project - DEA: 030H10U4 » Sample 2020-06-30-54 » Sample Details

Sample Record

Owner Lab

  • CT D03 - Olivehurst Northern Regional Laboratory

DIME Sample ID 2020-06-30-54

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 213411
DEA: 030H10U4
EFIS: 0317000246
DIST-CO-RTE-PM03-SAC-5-9.7/24.9
Award Date05/01/2019
Closeout Date02/22/2024
Work DescriptionNot set
Location DescriptionConstruction on state highway in Sacramento County in and near Sacramento from 1.1 miles south of Elk Grove Boulevard to American River Viaduct
QA Service Level1 (Verified on 07/19/2019)

Sample Information

Sample Taken Date06/30/2020 Sample Unique Key54
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/01/2020
Sample typeVerification A brief description of the sample3/4 inch HMA-A, LL (intermediate)
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byJ. (WITNESS) Last name of sampler or witnessed byBuscheck (WITNESS)
Title of samplerTeichert Personnel Telephone number of sampler
Laboratory sample identificationJMF20-037 Linked DIME Sample ID
The fabricator/manufacturer/facility nameTeichert Perkins Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-34-0045::ASPEN IV SOUTH
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedHot Bins
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2020-225 Date Created12/01/2020
JMF Submittal IDJMF3511-23-2020-313 JMF StatusSubmittal Accepted for Verification
Producer Mix IDPN202007-INT Authorized DateN/A

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2020-06-30-54-1AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/26/2020
Yes
12/02/2020JMF 20-037. Test date estimated.Public - Test Data Visible
2020-06-30-54-2AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory08/26/2020
Yes
12/02/2020JMF20-037. Test date estimated.Public - Test Data Visible
2020-06-30-54-3AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory08/27/2020
Yes
12/02/2020JMF20-037. Test date estimated.Public - Test Data Visible
2020-06-30-54-4THIS TEST HAS BEEN SUPERSEDED.
AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)		Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/27/2020
Yes
12/02/2020THIS TEST HAS BEEN SUPERSEDED.
JMF20-037. Test date estimated		Public - Test Data Visible
2020-06-30-54-5ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/27/2020
Yes
12/02/2020JMF20-037. Test date estimated.Public - Test Data Visible
2020-06-30-54-6CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/28/2020
Yes
12/02/2020JMF20-037. Test date estimated.Public - Test Data Visible
2020-06-30-54-7AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/28/2020
Yes
12/02/2020JMF20-037. Test date estimated.Public - Test Data Visible
2020-06-30-54-8AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory08/28/2020
Yes
12/02/2020JMF20-037. Test date estimated.Public - Test Data Visible
2020-06-30-54-10AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Thom Stinnett, CT D03 - Olivehurst Northern Regional Laboratory08/27/202012/02/2020
Yes
12/02/2020JMF20-037. Test date estimatedPublic - Test Data Visible
2020-06-30-54-9AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Jeff Herbert, CT D03 - Olivehurst Northern Regional Laboratory08/28/2020
Yes
12/02/2020JMF20-037. Test date estimated.Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-06-30-54-1 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-06-30-54-2 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-06-30-54-3 AASHTO T176-08 (Verified)
DIME Test ID: 2020-06-30-54-4 AASHTO T304-11 (Verified)
DIME Test ID: 2020-06-30-54-5 ASTM D4791-10 (Verified)
DIME Test ID: 2020-06-30-54-6 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-06-30-54-7 AASHTO T85-13 (Verified)
DIME Test ID: 2020-06-30-54-8 AASHTO T84-14 (Verified)
DIME Test ID: 2020-06-30-54-10 AASHTO T304-11 (Verified)
DIME Test ID: 2020-06-30-54-9 AASHTO T27-14 (Verified)