DIME - Sample Record for DIME Sample ID 2020-06-11-65

DIME » All Projects » Project - DEA: 021H9704 » Sample 2020-06-11-65 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-06-11-65

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212866 DEA: 021H9704 EFIS: 0216000051
DIST-CO-RTE-PM	02-TEH-36-12.6/13.1
Award Date	11/25/2019
Closeout Date	10/06/2020
Work Description	CURVE REALIGNMENT AND HMA PAVING.
Location Description	TEHAMA COUNTY ABOUT 16 MILES EAST OF PLATINA FROM 2.3 MILES EAST TO 2.8 MILES EAST OF DRY CREEK BRIDGE
QA Service Level	1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date	06/11/2020	Sample Unique Key	65
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/11/2020
Sample type	Department Acceptance	A brief description of the sample	3/4" RHMA G
The quantity of what the sample constitutes	not identified	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Dave	Last name of sampler or witnessed by	Lockett
Title of sampler		Telephone number of sampler
Laboratory sample identification	D78470	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Tullis Inc - Northstate Asphalt - Redding, CA	Transportation Laboratory (TL) Number	736621
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	RHMA-G
HMA Grading	3/4 inch	Lot number
Sublot number		HMA Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-06-11-65-1	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Michael Antonetti, CT D02 - Redding Northern Regional Laboratory	06/26/2020	Michael Antonetti	Yes	10/19/2020
2020-06-11-65-3	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	06/11/2020	Michael Antonetti	Yes	10/19/2020
2020-06-11-65-4	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	06/12/2020	Michael Antonetti	Yes	10/19/2020
2020-06-11-65-5	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Michael Antonetti, CT D02 - Redding Northern Regional Laboratory	06/26/2020	Michael Antonetti	Yes	10/19/2020
2020-06-11-65-6	AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	06/17/2020	Michael Antonetti	Yes	10/19/2020	Corrected test date, antistrip, passes (Wheel B), SIP (Wheel B). - WJ 2020-10-19.
2020-06-11-65-7	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	10/19/2020	Michael Antonetti	Yes	10/19/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-06-11-65-1 AASHTO T308-10 (Verified)
DIME Test ID: 2020-06-11-65-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2020-06-11-65-4 AASHTO T269-14 (Verified)
DIME Test ID: 2020-06-11-65-5 AASHTO T283-14 (Verified)
DIME Test ID: 2020-06-11-65-6 AASHTO T324-14 (Verified)
DIME Test ID: 2020-06-11-65-7 AASHTO T209-12 (Verified)