DIME » All Projects » Project - DEA: 024G41U4 » Sample 2020-08-03-36 » Sample Details

Sample Record

Owner Lab

  • CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2020-08-03-36

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214190
DEA: 024G41U4
EFIS: 0218000047
DIST-CO-RTE-PM02-SIS,SIS-5-Var
Award Date08/26/2019
Closeout Date11/24/2021
Work DescriptionREPLACE REINFORCED CONCRETE BRIDGES & CONSTRUCT RETAINING WALL.
Location DescriptionSHASTA AND SISKIYOU COUNTIES ABOUT 7 MILES NORTH OF POLLARD FLAT FROM 0.8 MILE SOUTH TO 0.7 MILE NORTH OF SIMS ROAD UNDERCROSSING AND FROM 0.6 MILE SOUTH OF CASTLE CRAGS DRIVE UNDERCROSSING TO 0.2 MILE SOUTH OF SOUTH DUNSMUIR UNDERCROSSING
QA Service Level1 (Verified on 07/09/2019)

Sample Information

Sample Taken Date08/03/2020 Sample Unique Key36
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/05/2020
Sample typeDepartment Acceptance A brief description of the samplePG 58-34M #1 test
The quantity of what the sample constitutes1 Can From where was the sample collectedSource
First name of sampler or witnessed byJF Last name of sampler or witnessed byshea
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameValero Benicia Transportation Laboratory (TL) Number896007
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank numberNot set
Time of sampleNot set HMA SupplierNot set
Certified Asphalt SupplierNot set MultigradeNot set
Multigrade TypeNot set Asphalt Binder Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2020-08-03-36-1AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)Ruben Macias, CT HQ - Sacramento Asphalt Binder Laboratory09/10/2020Justin Ellis
Yes
09/22/2020
2020-08-03-36-2AASHTO T301-13: Standard Method of Test for Elastic Recovery Test of Asphalt Materials by Means of a DuctilometerRuben Macias, CT HQ - Sacramento Asphalt Binder Laboratory09/16/2020Juan Gomez
Yes
09/22/2020
2020-08-03-36-3AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Juan Gomez, CT HQ - Sacramento Asphalt Binder Laboratory09/16/2020Justin Ellis
Yes
09/21/2020
2020-08-03-36-5AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)Sunday Agude, CT HQ - Sacramento Asphalt Binder Laboratory09/15/2020Juan Gomez
Yes
10/12/2020Per 2018 Standard Specifications
2020-08-03-36-6AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory09/10/2020Justin Ellis
Yes
09/22/2020
2020-08-03-36-7AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)Eva Torres, CT HQ - Sacramento Asphalt Binder Laboratory09/10/2020Justin Ellis
Yes
09/22/2020At 64 C phase angle = 56.7 and dynamic shear = 6.66

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-08-03-36-1 AASHTO T240-17 (Verified)
DIME Test ID: 2020-08-03-36-2 AASHTO T301-13 (Verified)
DIME Test ID: 2020-08-03-36-3 AASHTO T315-16 (Verified)
DIME Test ID: 2020-08-03-36-5 AASHTO T313-19 (Verified)
DIME Test ID: 2020-08-03-36-6 AASHTO T315-16 (Verified)
DIME Test ID: 2020-08-03-36-7 AASHTO T315-16 (Verified)