DIME - Sample Record for DIME Sample ID 2020-08-04-4

DIME » All Projects » Project - DEA: 042K7504 » Sample 2020-08-04-4 » Sample Details

Sample Record

Owner Labs

BSK Associates
CT D04 - Hayward DME / District Laboratory

DIME Sample ID 2020-08-04-4

Project Information

Project Identifiers	Project ID: 214059 DEA: 042K7504 EFIS: 0417000019
DIST-CO-RTE-PM	04-SCL-152-7.6/M10.2
Award Date	05/24/2019
Closeout Date	04/12/2021
Work Description	ROADWAY REHAB, CURB RAMPS, SIGNALS, AND STRIPING UPGRADES.
Location Description	SANTA CLARA COUNTY IN GILROY FROM 0.3 MILE WEST OF SANTA TERESA BOULEVARD TO ROUTE 101
QA Service Level	1 (Verified on 06/04/2019)

Sample Information

Sample Taken Date	08/04/2020	Sample Unique Key	4
Will the laboratory/organization for which you are a member perform testing on this material sample?	No	Date that the sample was received by the laboratory/organization performing the testing	Not set
Sample type	Verification	A brief description of the sample	3/8HMA aggregate
The quantity of what the sample constitutes	16 bags	From where was the sample collected	Source
First name of sampler or witnessed by	purvey	Last name of sampler or witnessed by	Shah
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite Construction Company	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-24-0009
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Los Banos Plans
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/8 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2020-177	Date Created	08/04/2020
JMF Submittal ID	JMF3511-318-2020-259	JMF Status	Submittal Accepted for Verification
Producer Mix ID	64-10SP	Authorized Date	N/A

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date
2020-08-04-4-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/08/2020	Babak Kamranimoghaddam	Yes	08/05/2020
2020-08-04-4-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/08/2020	Babak Kamranimoghaddam	Yes	08/05/2020
2020-08-04-4-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/08/2020	Babak Kamranimoghaddam	Yes	08/05/2020
2020-08-04-4-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/07/2020	Babak Kamranimoghaddam	Yes	08/05/2020
2020-08-04-4-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/07/2020	Babak Kamranimoghaddam	Yes	08/05/2020
2020-08-04-4-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/07/2020	Babak Kamranimoghaddam	Yes	08/05/2020
2020-08-04-4-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/07/2020	Babak Kamranimoghaddam	Yes	08/05/2020
2020-08-04-4-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Nicholas Shelly, CT D04 - Hayward DME / District Laboratory	07/07/2020	Babak Kamranimoghaddam	Yes	08/05/2020

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-08-04-4-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-08-04-4-2 AASHTO T84-14 (Verified)
DIME Test ID: 2020-08-04-4-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-08-04-4-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-08-04-4-5 AASHTO T176-08 (Verified)
DIME Test ID: 2020-08-04-4-6 AASHTO T304-11 (Verified)
DIME Test ID: 2020-08-04-4-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-08-04-4-8 ASTM D4791-10 (Verified)