DIME » All Projects » Project - DEA: 100L0204 » Sample 2020-07-31-3 » Sample Details

Sample Record

Owner Lab

  • CT HQ - QASI Sacramento Field Office

DIME Sample ID 2020-07-31-3

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 212596
DEA: 100L0204
EFIS: 1013000053
DIST-CO-RTE-PM10-SJ,STA-99-0.0-0.7:24.4-24.8
Award Date11/30/2018
Closeout Date07/15/2021
Work DescriptionPartial Bridge Replacement
Location DescriptionON ROUTE 99 IN RIPON AT THE COUNTY LINE OF SAN JOAQUIN COUNTY AND STANISLAUS COUNTY AT THE STANISLAUS RIVER BRIDGES (29-0013L/R).
QA Service Level1 (Verified on 12/19/2018)

Sample Information

Sample Taken Date07/31/2020 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/06/2020
Sample typeQuality Assurance A brief description of the sampleA325 ROCAP ASSEMBLY
The quantity of what the sample constitutes755 From where was the sample collectedFabricator
First name of sampler or witnessed byMahlon Last name of sampler or witnessed byLindenmuth
Title of samplerQA Inspector Telephone number of sampler646-740-3704
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameUtah Pacific Bridge and Steel Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormS46-630-20 Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)U88982
Heat Number(s)Bolt DL18107414 Nut 75076196 Washer 182006 Nut Mfg. Lot Number(s)30842-S-75076196
Washer Mfg. Lot Number(s)D7353 Bolt SpecificationASTM A325
Bolt Length(s)2-1/4" Nut SpecificationASTM A 563-DH
Washer SpecificationF436 FinishHDG
Diameter/Size7/8" Bolt Mfg. Lot NumberBG1493
Rocap Test Requirement(s) Lubricant Requirements(s)Lubricated
Washer Inner Diameter(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2020-07-31-3-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/202008/06/2020
Yes
08/12/2020Nut ProffPublic - Test Data Visible
2020-07-31-3-2ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)fsaylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/202008/06/2020
Yes
08/12/2020Nut ProffPublic - Test Data Visible
2020-07-31-3-3ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
2020-07-31-3-4ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
2020-07-31-3-5ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
2020-07-31-3-6ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
2020-07-31-3-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
2020-07-31-3-8ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
2020-07-31-3-9ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
2020-07-31-3-10ASME B1.2-83r01: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)Fred Saylor, CT HQ - Sacramento Structural Materials Testing Laboratory08/06/2020
Yes
08/12/2020Public - Test Data Visible
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-07-31-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2020-07-31-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2020-07-31-3-3 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-4 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-5 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-6 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2020-07-31-3-13 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-14 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-15 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-16 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-17 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-18 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-19 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-20 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-21 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-22 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-23 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-24 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-25 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-26 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-27 ASTM B499-14 (Verified)
DIME Test ID: 2020-07-31-3-28 ASTM E18-15 (Verified)
DIME Test ID: 2020-07-31-3-29 ASTM E18-15 (Verified)
DIME Test ID: 2020-07-31-3-30 ASTM E18-15 (Verified)
DIME Test ID: 2020-07-31-3-31 ASTM E18-15 (Verified)
DIME Test ID: 2020-07-31-3-32 ASTM E18-15 (Verified)
DIME Test ID: 2020-07-31-3-33 ASTM E18-15 (Verified)