Sample Record
Owner Lab
- Trinity Engineering Laboratories, Incorporated - Fresno
DIME Sample ID 2020-06-24-32
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 214292 DEA: 060Q9004 EFIS: 0614000047 |
|---|---|
| DIST-CO-RTE-PM | 06-FRE-180-92.2,130.1 |
| Award Date | 12/13/2019 |
| Closeout Date | 10/29/2020 |
| Work Description | REPLACE BRIDGE RAILS. |
| Location Description | FRESNO COUNTY NEAR SQUAW VALLEY AT MILL CREEK BRIDGE AND NEAR BOYDEN CAVE AT SOUTH FORK KINGS RIVER BRIDGE |
| QA Service Level | 1 (Verified on 08/05/2019) |
Sample Information
| Sample Taken Date | 06/24/2020 | Sample Unique Key | 32 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/25/2020 |
| Sample type | Quality Control | A brief description of the sample | PCC |
| The quantity of what the sample constitutes | four cylinders | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Riley | Last name of sampler or witnessed by | Dowdy |
| Title of sampler | QC Technician | Telephone number of sampler | 5597506101 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Outback Materials | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 80T1X38 |
|---|---|---|---|
| The truck number from where the sample was collected | 78 | The batch plant ticket number from where the sample was collected | 50243 |
| Concrete batch plant | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| A detailed description of where the material sample was collected | Unknown | Where the material sample would have been placed if not sampled | Unknown |
| From Lot No. | Unknown | Bag Lot No. | Unknown |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2020-06-24-32-1 | ASTM C143-10a: Standard Test Method for Slump of Hydraulic-Cement Concrete | Riley Dowdy, Trinity Engineering Laboratories, Incorporated - Fresno | 06/24/2020 | No | |||||
| 2020-06-24-32-2 | CTM 504-June 2010: Method of Test for Determining Air Content of Freshly Mixed Concrete by the Pressure Method | Riley Dowdy, Trinity Engineering Laboratories, Incorporated - Fresno | 06/24/2020 | No | |||||
| 2020-06-24-32-3 | CTM 521-June 2012: Method of Test for Compressive Strength of Molded Concrete Cylinders | Riley Dowdy, Trinity Engineering Laboratories, Incorporated - Fresno | 07/02/2020 | No | |||||
| 2020-06-24-32-4 | CTM 521-June 2012: Method of Test for Compressive Strength of Molded Concrete Cylinders | Riley Dowdy, Trinity Engineering Laboratories, Incorporated - Fresno | 07/06/2020 | No | |||||
| 2020-06-24-32-5 | CTM 521-June 2012: Method of Test for Compressive Strength of Molded Concrete Cylinders | Riley Dowdy, Trinity Engineering Laboratories, Incorporated - Fresno | 07/13/2020 | No | |||||
| 2020-06-24-32-6 | CTM 521-June 2012: Method of Test for Compressive Strength of Molded Concrete Cylinders | Matthew Horn, Trinity Engineering Laboratories, Incorporated - Fresno | 07/22/2020 | No |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2020-06-24-32-1 ASTM C143-10a
DIME Test ID: 2020-06-24-32-2 CTM 504-June 2010
DIME Test ID: 2020-06-24-32-3 CTM 521-June 2012
DIME Test ID: 2020-06-24-32-4 CTM 521-June 2012
DIME Test ID: 2020-06-24-32-5 CTM 521-June 2012
DIME Test ID: 2020-06-24-32-6 CTM 521-June 2012