DIME - Sample Record for DIME Sample ID 2020-07-01-24

DIME » All Projects » Project - DEA: 080M9004 » Sample 2020-07-01-24 » Sample Details

Sample Record

DIME Sample ID 2020-07-01-24

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214924 DEA: 080M9004 EFIS: 0812000248 COOP: 081695
DIST-CO-RTE-PM	08-RIV-111-18.0/19.0
Award Date	Not set
Closeout Date	Not set
Work Description	The purpose of the project is to provide a grade separated crossing over the existing UPRR, SR-111 and Hammond Road in the Mecca Community that will provide the following benefits: provide a secondary access point to the Community of Mecca.
Location Description	The project is in Riverside County from 0.47 miles east of State Route 86 to 0.45 miles west of Johnson Street.
QA Service Level	2 (Verified on 04/22/2020)

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

Sample Information

Sample Taken Date	07/01/2020	Sample Unique Key	24
Date that the sample was received by the laboratory/organization performing the testing	07/13/2020	Sample type	Verification
A brief description of the sample	JMF 3/4" RHMA-G-SP 0.50% LAS Aggregate	The quantity of what the sample constitutes	3 Bags Combined Aggregate
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	Matich Cabazon
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0429G-20
Linked DIME Sample ID		The fabricator/manufacturer/facility name	Matich-Cabazon
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0008, 91-36-0040
The fabricator's/manufacturer's product name for the sample	3/4 RHMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	CHP 68E	A detailed description of where the material sample was collected	Belt Cut at Matich Cabazon Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Test Comments	Privacy Level
2020-07-01-24-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain, Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory	07/14/2020	Yes	07/21/2020	Combined Virgin Gradation	Public - Test Data Visible
2020-07-01-24-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	07/16/2020	Yes	07/21/2020		Public - Test Data Visible
2020-07-01-24-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	07/16/2020	Yes	07/21/2020		Public - Test Data Visible
2020-07-01-24-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory	07/17/2020	Yes	07/21/2020		Public - Test Data Visible
2020-07-01-24-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Michael Magana, CT D08 - Fontana Southern Regional Laboratory	07/15/2020	Yes	07/21/2020		Public - Test Data Visible
2020-07-01-24-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	07/15/2020	Yes	07/21/2020		Public - Test Data Visible
2020-07-01-24-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	07/16/2020	Yes	07/21/2020		Public - Test Data Visible
2020-07-01-24-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	07/16/2020	Yes	07/21/2020		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-07-01-24-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-07-01-24-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-07-01-24-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-07-01-24-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-07-01-24-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-07-01-24-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-07-01-24-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-07-01-24-8 AASHTO T304-11 (Verified)