Sample Record
Owner Lab
- Trinity Engineering Laboratories, Incorporated - Fresno
DIME Sample ID 2013-11-12-7558321
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 10016 DEA: 06342524 EFIS: 0600000381 |
|---|---|
| DIST-CO-RTE-PM | 06-FRE-180-R71.8/74.5 |
| Award Date | 04/23/2013 |
| Closeout Date | 10/19/2020 |
| Work Description | NEW EXPRESS HIGHWAY |
| Location Description | FRESNO COUNTY ABOUT 6.3 MILES EAST OF FRESNO FROM 0.6 MILE WEST OF QUALITY AVENUE TO 0.2 MILE WEST OF SMITH AVENUE |
| QA Service Level | 1 (Verified on 07/23/2013) |
Sample Information
| Sample Taken Date | 11/12/2013 | Sample Unique Key | 7558321 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/12/2013 |
| Sample type | Quality Control | A brief description of the sample | Washed Concrete Sand at 19 yards |
| The quantity of what the sample constitutes | 4 Bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Allen | Last name of sampler or witnessed by | Oliver |
| Title of sampler | Plant Inspector | Telephone number of sampler | (580) 238-8823 |
| Laboratory sample identification | 2013-11-12-07-55-8321 | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | Builders Concrete Ready Mix Plant Sanger | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-10-0010 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Sand | The fabricator/manufacturer designation for the sample | Plant |
| The plant number | 111 | A detailed description of where the material sample was collected | Conveyer Belt |
| Where the material sample would have been placed if not sampled | Stockpiles | Primary Aggregate Nominal Size | |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Submitted By | Verified? | Release Date | Test Comments | Actions |
|---|---|---|---|---|---|---|---|---|
| 2013-11-12-7558321-1 | AASHTO T255-0: Standard Method of Test for Total Evaporable Moisture Content of Aggregate by Drying | Allen Oliver, Trinity Engineering Laboratories, Incorporated - Fresno | 11/15/2013 | Allen Oliver | No | Info | ||
| 2013-11-12-7558321-2 | ASTM C136-06: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates | Allen Oliver, Trinity Engineering Laboratories, Incorporated - Fresno | 11/15/2013 | Allen Oliver | No | Info | ||
| 2013-11-12-7558321-3 | ASTM D2419-09: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate | Allen Oliver, Trinity Engineering Laboratories, Incorporated - Fresno | 11/15/2013 | Allen Oliver | No | Info | ||
| 2013-11-12-7558321-4 | ASTM D2419-09: Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate | Allen Oliver, Trinity Engineering Laboratories, Incorporated - Fresno | 11/13/2013 | Allen Oliver | No | Info |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2013-11-12-7558321-1 AASHTO T255-0
DIME Test ID: 2013-11-12-7558321-2 ASTM C136-06
DIME Test ID: 2013-11-12-7558321-3 ASTM D2419-09
DIME Test ID: 2013-11-12-7558321-4 ASTM D2419-09