DIME » All Projects » Project - DEA: 020J1604 » Sample 2020-04-20-21 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2020-04-20-21

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214589
DEA: 020J1604
DIST-CO-RTE-PM02-PLU-284-0.0/8.3
Award Date02/11/2020
Closeout Date10/06/2020
Work DescriptionPLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING).
Location DescriptionPLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072
QA Service Level1 (Verified on 01/22/2020)

Sample Information

Sample Taken Date04/20/2020 Sample Unique Key21
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/21/2020
Sample typeVerification A brief description of the sampleCombined 3/4-inch Type A Untreated Sized Virgin Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byJimmy Last name of sampler or witnessed byMontana
Title of sampler Telephone number of sampler
Laboratory sample identificationD78409F Linked DIME Sample ID
The fabricator/manufacturer/facility nameWard Lake Pit Transportation Laboratory (TL) Number733180
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-18-0008::WARD LAKE PIT
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedLab-Batched from Sized Untreated Aggregate Stockpile
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberJMF 20-03-S1a Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

JMF Information

Verification IDJMF3513-2020-138 Date Created06/09/2020
JMF Submittal IDJMF3511-22-2020-211 JMF StatusSubmittal Rejected For Use
Producer Mix ID20-1278.117-0.75HMA Rejected Date06/12/2020

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2020-04-20-21-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Ward Jenkins, CT D02 - Redding Northern Regional Laboratory06/09/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-2CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)Terry McCormick, CT D02 - Redding Northern Regional Laboratory06/10/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-3AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Colt Sweeny, CT D02 - Redding Northern Regional Laboratory06/09/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-4AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Arthur Mills, CT D02 - Redding Northern Regional Laboratory06/10/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-5AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Ward Jenkins, CT D02 - Redding Northern Regional Laboratory06/11/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory06/11/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-7AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Arthur Mills, CT D02 - Redding Northern Regional Laboratory06/09/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-8AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)Terry McCormick, CT D02 - Redding Northern Regional Laboratory06/10/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-9AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Terry McCormick, CT D02 - Redding Northern Regional Laboratory06/10/2020
Yes
06/11/2020Public - Test Data Visible
2020-04-20-21-10ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Arthur Mills, CT D02 - Redding Northern Regional Laboratory06/10/2020
Yes
06/11/2020Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-04-20-21-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-04-20-21-2 CTM 204-June 2010 (Verified)
DIME Test ID: 2020-04-20-21-3 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-04-20-21-4 AASHTO T85-13 (Verified)
DIME Test ID: 2020-04-20-21-5 AASHTO T84-14 (Verified)
DIME Test ID: 2020-04-20-21-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-04-20-21-7 AASHTO T176-08 (Verified)
DIME Test ID: 2020-04-20-21-8 AASHTO T210-15 (Verified)
DIME Test ID: 2020-04-20-21-9 AASHTO T304-11 (Verified)
DIME Test ID: 2020-04-20-21-10 ASTM D4791-10 (Verified)