DIME - Sample Record for DIME Sample ID 2020-05-04-20

DIME » All Projects » Project - DEA: 051F1004 » Sample 2020-05-04-20 » Sample Details

Sample Record

Owner Lab

CT D05 - San Luis Obispo District Laboratory

DIME Sample ID 2020-05-04-20

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213884 DEA: 051F1004 EFIS: 0513000057 Permit Numbers: 0519NOP0704 0520NDP0091
DIST-CO-RTE-PM	05---82.18/-1
Award Date	01/07/2020
Closeout Date	08/17/2022
Work Description	Re-align on and off-ramps at NB interchange. Signalize the intersection, revise pavement delineation and markings on Clark Avenue, minor pavement rehabilitation, guardrail replacement and widening at southbound off-ramp.Construct interchange improvements at US Highway 101 and Clark Avenue accordin
Location Description	US Highway 101, Orcutt unincorporated
QA Service Level	1 (Verified on 02/18/2020)

Sample Information

Sample Taken Date	05/04/2020	Sample Unique Key	20
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/07/2020
Sample type	Verification	A brief description of the sample	Boxes of RHMA-G
The quantity of what the sample constitutes	One JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Sal	Last name of sampler or witnessed by	Lopez
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Granite Buellton	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	RHMA-G
HMA Grading	3/4 inch	Lot number	Unknown
Sublot number	Unknown	HMA Mix Number	Not set

JMF Information

Verification ID	JMF3513-2020-120	Date Created	05/12/2020
JMF Submittal ID	JMF3511-173-2020-185	JMF Status	Submittal Authorized For Use
Producer Mix ID	1558	Authorized Date	05/13/2020

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2020-05-04-20-1	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	E. Atkins, CT D05 - San Luis Obispo District Laboratory	05/12/2020	Daniel Gingras	Yes	05/13/2020
2020-05-04-20-2	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	E. Atkins, CT D05 - San Luis Obispo District Laboratory	05/11/2020	Daniel Gingras	Yes	05/13/2020
2020-05-04-20-3	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	E. Atkins, CT D05 - San Luis Obispo District Laboratory	05/11/2020	Daniel Gingras	Yes	05/13/2020
2020-05-04-20-4	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	E. Atkins, CT D05 - San Luis Obispo District Laboratory	05/11/2020	Daniel Gingras	Yes	05/13/2020
2020-05-04-20-5	AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)	E. Atkins, CT D05 - San Luis Obispo District Laboratory	05/12/2020	Daniel Gingras	Yes	05/13/2020	Inflection point is report only with CPD 19-8 CCO. 3.51 mm is average rut depth of both the left and right sides.

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-05-04-20-1 AASHTO T308-10 (Verified)
DIME Test ID: 2020-05-04-20-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2020-05-04-20-3 AASHTO T209-12 (Verified)
DIME Test ID: 2020-05-04-20-4 AASHTO T269-14 (Verified)
DIME Test ID: 2020-05-04-20-5 AASHTO T324-14 (Verified)