DIME - Sample Record for DIME Sample ID 2020-01-27-25

DIME » All Projects » Project - DEA: 051C8904 » Sample 2020-01-27-25 » Sample Details

Sample Record

Owner Lab

CT D05 - San Luis Obispo District Laboratory

DIME Sample ID 2020-01-27-25

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213596 DEA: 051C8904 EFIS: 0513000009
DIST-CO-RTE-PM	05-MON-101-87.3/R91.5
Award Date	12/13/2018
Closeout Date	08/23/2023
Work Description	PRECAST CONC PVMT, CRACK AND SEAT PAVEMENT AND RECONSTRUCT RAMPS.
Location Description	MONTEREY COUNTY IN SALINAS FROM EAST MARKET STREET UNDERCROSSING TO 0.3 MILE SOUTH OF ESPINOSA ROAD
QA Service Level	1 (Verified on 01/04/2019)

Sample Information

Sample Taken Date	01/27/2020	Sample Unique Key	25
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/12/2020
Sample type	Verification	A brief description of the sample	Aggregate for HMA-A
The quantity of what the sample constitutes	One JMF Renewal	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Anthony	Last name of sampler or witnessed by	Romiza
Title of sampler		Telephone number of sampler
Laboratory sample identification	20-J-002	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Graniterock Aromas Drum Plant	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-35-0012::A.R. WILSON QUARRY
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	From the plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2020-95	Date Created	02/24/2020
JMF Submittal ID	JMF3511-173-2020-138	JMF Status	Submittal Authorized For Use
Producer Mix ID	938	Authorized Date	03/02/2020

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2020-01-27-25-1	THIS TEST HAS BEEN SUPERSEDED. AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	02/14/2020		Yes	02/24/2020	THIS TEST HAS BEEN SUPERSEDED.	Public - Test Data Visible
2020-01-27-25-3	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	02/14/2020		Yes	02/24/2020		Public - Test Data Visible
2020-01-27-25-4	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	02/14/2020		Yes	02/24/2020		Public - Test Data Visible
2020-01-27-25-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	02/18/2020		Yes	02/24/2020		Public - Test Data Visible
2020-01-27-25-6	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	03/19/2019		Yes	03/02/2020		Public - Test Data Visible
2020-01-27-25-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	03/19/2019		Yes	03/02/2020		Public - Test Data Visible
2020-01-27-25-8	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	03/19/2019		Yes	03/02/2020		Public - Test Data Visible
2020-01-27-25-9	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	03/19/2019		Yes	03/02/2020		Public - Test Data Visible
2020-01-27-25-10	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	03/19/2019		Yes	03/02/2020		Public - Test Data Visible
2020-01-27-25-11	THIS TEST HAS BEEN SUPERSEDED. AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Daniel Gingras, CT D05 - San Luis Obispo District Laboratory	03/02/2020	03/02/2020	Yes	03/02/2020	THIS TEST HAS BEEN SUPERSEDED.	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2020-01-27-25-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-01-27-25-3 AASHTO T84-14 (Verified)
DIME Test ID: 2020-01-27-25-4 AASHTO T85-13 (Verified)
DIME Test ID: 2020-01-27-25-5 AASHTO T176-08 (Verified)
DIME Test ID: 2020-01-27-25-6 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-01-27-25-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-01-27-25-8 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-01-27-25-9 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-01-27-25-10 ASTM D4791-10 (Verified)
DIME Test ID: 2020-01-27-25-11 AASHTO T27-14 (Verified)
DIME Test ID: 2020-01-27-25-12 AASHTO T27-14 (Verified)