Sample Record
DIME Sample ID 2019-11-16-4
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 213740 DEA: 07312604 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5-R77.5/R81.8 |
| Award Date | 01/04/2019 |
| Closeout Date | 06/04/2020 |
| Work Description | EXCAVATE DITCHES, PLACE PERM MTL, AND CONSTRUCT RET WALLS. |
| Location Description | LOS ANGELES COUNTY AT VARIOUS LOCATIONS FROM 0.4 MILE SOUTH OF SMOKEY BEAR ROAD UNDERCROSSING TO 0.3 MILE SOUTH OF ROUTE 5/138 SEPARATION |
| QA Service Level | 1 (Verified on 06/04/2020) |
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
Sample Information
| Sample Taken Date | 11/16/2019 | Sample Unique Key | 4 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 11/25/2019 | Sample type | Department Acceptance |
| A brief description of the sample | 3/4 WMA-A-SP R15 | The quantity of what the sample constitutes | 3 Bulk Bags |
| From where was the sample collected | Manufacturer | First name of sampler or witnessed by | Cesar |
| Last name of sampler or witnessed by | QC | Title of sampler | QC |
| Telephone number of sampler | Laboratory sample identification | 8922-8924 | |
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | Vulcan Sun Valley | |
| Transportation Laboratory (TL) Number | C914326-C914328 | Inspector Lot Number from the Transportation Laboratory (TL) Form | |
| Structure unique identifier | Structure name | ||
| Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Vulcan Sun Valley |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 WMA-A-SP R15 | The fabricator/manufacturer designation for the sample | 220826 SVA SJR |
| The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at Vulcan Sun Valley Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2019-11-16-4-1 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Sebastian Ferrer, Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory | 11/26/2019 | No | Sand from Bin #1 (Lab #8922) | ||||
| 2019-11-16-4-2 | CTM 217-June 2011: Method of Test for Sand Equivalent | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 11/27/2019 | No | Sand from Bin #1 (Lab #8922) | ||||
| 2019-11-16-4-3 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory | 11/26/2019 | No | 3/8 Inch Aggregate from Bin #2 (Lab #8923) | ||||
| 2019-11-16-4-4 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory | 11/26/2019 | No | 7/16 Inch Aggregate from Bin #3 (Lab #8924) |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2019-11-16-4-1 CTM 202-November 2011
DIME Test ID: 2019-11-16-4-2 CTM 217-June 2011
DIME Test ID: 2019-11-16-4-3 CTM 202-November 2011
DIME Test ID: 2019-11-16-4-4 CTM 202-November 2011