DIME - Sample Record for DIME Sample ID 2019-08-26-3

DIME » All Projects » Project - DEA: 033F5504 » Sample 2019-08-26-3 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-08-26-3

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213570 DEA: 033F5504 EFIS: 0313000137
DIST-CO-RTE-PM	03-YOL,SAC-275-13.0,0.0
Award Date	12/07/2018
Closeout Date	06/21/2022
Work Description	REPLACE TIMBER FENDER SYSTEM SURROUNDING PIERS 6 AND 7
Location Description	YOLO AND SACRAMENTO COUNTIES IN WEST SACRAMENTO AND SACRAMENTO AT SACRAMENTO RIVER BRIDGE.
QA Service Level	1 (Verified on 01/08/2019)

Sample Information

Sample Taken Date	08/26/2019	Sample Unique Key	3
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/26/2019
Sample type	Quality Assurance	A brief description of the sample	A325 Bolt Assemblies
The quantity of what the sample constitutes	36	From where was the sample collected	Job Site
First name of sampler or witnessed by	Mahlon	Last name of sampler or witnessed by	Lindenmuth
Title of sampler		Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Platte Anchor Bolt	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form	S46-791-19	Structure unique identifier
Structure name

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)
Heat Number(s)	CR10377560 100892134 100889992 75068952 10471710	Nut Mfg. Lot Number(s)	27347-75068952
Washer Mfg. Lot Number(s)	303371	Bolt Specification	A325 HDG
Bolt Length(s)	3.75"	Nut Specification	A563 DH HDG
Washer Specification	B18.21.1 REG L/W 1060 HDG	Finish	HDG
Diameter/Size	.625	Bolt Mfg. Lot Number	404635A 414509A 752109
Rocap Test Requirement(s)		Lubricant Requirements(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2019-08-26-3-1	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-2	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-3	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-4	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-5	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-6	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-7	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-8	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-9	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/29/2019	spaine	Yes	09/04/2019	Wedge Tensile
2019-08-26-3-10	ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)	spaine, CT HQ - Sacramento Structural Materials Testing Laboratory	08/30/2019	spaine	Yes	09/04/2019	Nut Proof Load

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-08-26-3-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-2 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-5 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-6 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-7 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-8 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-9 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-10 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-11 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-12 ASTM F606-14a (Verified)
DIME Test ID: 2019-08-26-3-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-24 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-25 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-26 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-27 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-28 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-29 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-30 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-31 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-32 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-33 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-34 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-35 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-36 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-37 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-38 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-39 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-40 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-08-26-3-41 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-42 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-43 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-44 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-45 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-46 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-47 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-48 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-49 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-50 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-51 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-52 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-53 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-54 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-55 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-56 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-57 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-58 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-59 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-60 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-61 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-62 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-63 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-64 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-65 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-66 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-67 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-68 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-69 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-70 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-71 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-72 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-73 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-74 ASTM B499-14 (Verified)
DIME Test ID: 2019-08-26-3-75 ASTM B499-14 (Verified)