DIME » All Projects » Project - DEA: 024E6504 » Sample 2019-06-13-8 » Sample Details

Sample Record

Owner Lab

  • CT HQ - Sacramento Structural Materials Testing Laboratory

DIME Sample ID 2019-06-13-8

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 211775
DEA: 024E6504
EFIS: 0212000012
DIST-CO-RTE-PM02-SIS-96-R52.5/88.4
Award Date07/10/2017
Closeout Date01/05/2021
Work DescriptionWIDEN BRIDGES,POLYESTER CONC OVERLAY,COLD PLANE AC PVMT,HMA,GUARDRAIL
Location DescriptionSISKIYOU COUNTY NEAR SEIAD VALLEY AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF THOMPSON CREEK BRIDGE TO 0.2 MILE EAST OF BEAVER CREEK BRIDGE
QA Service Level1 (Verified on 08/23/2017)

Sample Information

Sample Taken Date06/13/2019 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/19/2019
Sample typeQuality Assurance A brief description of the sample A325 Bolt Assembly
The quantity of what the sample constitutes494 From where was the sample collectedManufacturer
First name of sampler or witnessed byM Last name of sampler or witnessed byLindenmuth
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameNucor Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s)100793509 100887131 10532620 100786789 DL18104898 175699 Nut Mfg. Lot Number(s)415206A
Washer Mfg. Lot Number(s)309017 Bolt SpecificationA325 HDG
Bolt Length(s)2.25" 2.75" 3" 3.25" Nut SpecificationA563 DH HDG
Washer SpecificationF436 HDG FinishHDG
Diameter/Size7/8" Bolt Mfg. Lot Number415844A 396618A 805830 392621A
Rocap Test Requirement(s) Lubricant Requirements(s)
Washer Inner Diameter(s)

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2019-06-13-8-1ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/201906/21/2019
Yes
06/24/2019A325Public - Test Data Visible
2019-06-13-8-3ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/201906/21/2019
Yes
06/24/2019A325Public - Test Data Visible
2019-06-13-8-4ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/201906/21/2019
Yes
06/24/2019A325Public - Test Data Visible
2019-06-13-8-5ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/201906/21/2019
Yes
06/24/2019Nut Proof LoadPublic - Test Data Visible
2019-06-13-8-6ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load)Steve, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/201906/21/2019
Yes
06/24/2019Nut Proof LoadPublic - Test Data Visible
2019-06-13-8-7ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/2019
Yes
06/24/2019Public - Test Data Visible
2019-06-13-8-8ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/2019
Yes
06/24/2019Public - Test Data Visible
2019-06-13-8-9ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/2019
Yes
06/24/2019Public - Test Data Visible
2019-06-13-8-10ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/2019
Yes
06/24/2019Public - Test Data Visible
2019-06-13-8-11ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory06/21/2019
Yes
06/24/2019Public - Test Data Visible
Go to page:

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2019-06-13-8-1 ASTM F606-14a (Verified)
DIME Test ID: 2019-06-13-8-3 ASTM F606-14a (Verified)
DIME Test ID: 2019-06-13-8-4 ASTM F606-14a (Verified)
DIME Test ID: 2019-06-13-8-5 ASTM F606-14a (Verified)
DIME Test ID: 2019-06-13-8-6 ASTM F606-14a (Verified)
DIME Test ID: 2019-06-13-8-7 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-8 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-19 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-20 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-21 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-22 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-23 ASME B1.2-83r01 (Verified)
DIME Test ID: 2019-06-13-8-24 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-25 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-26 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-27 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-28 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-29 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-30 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-31 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-32 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-33 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-34 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-35 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-36 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-37 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-38 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-39 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-40 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-41 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-42 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-43 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-44 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-45 ASTM B499-14 (Verified)
DIME Test ID: 2019-06-13-8-46 ASTM E18-15 (Verified)
DIME Test ID: 2019-06-13-8-47 ASTM E18-15 (Verified)
DIME Test ID: 2019-06-13-8-48 ASTM E18-15 (Verified)
DIME Test ID: 2019-06-13-8-49 ASTM E18-15 (Verified)
DIME Test ID: 2019-06-13-8-50 ASTM E18-15 (Verified)