DIME - Sample Record for DIME Sample ID 2019-04-24-33

DIME » All Projects » Project - DEA: 081E6104 » Sample 2019-04-24-33 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2019-04-24-33

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 213606 DEA: 081E6104 EFIS: 0814000055
DIST-CO-RTE-PM	08-SBD-62-41.0/41.5and60.6/61.1
Award Date	10/31/2018
Closeout Date	11/12/2019
Work Description	WIDENING OF SHOULDER AND INSTALLING RUMBLE STRIPS
Location Description	SAN BERNARDINO COUNTY NEAR TWENTYNINE PALMS FROM 0.7 MILE TO 1.2 MILES EAST OF GODWIN ROAD AND FROM 5.6 MILES TO 6.1 MILES EAST OF IRONAGE ROAD
QA Service Level	1 (Verified on 11/30/2018)

Sample Information

Sample Taken Date	04/24/2019	Sample Unique Key	33
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/03/2019
Sample type	Verification	A brief description of the sample	3/4 HMA-A-SP, R15
The quantity of what the sample constitutes	PSE 4 bags	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	All American Asphalt Perris	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0262A-19	Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt Corona	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample	3/4 HMA-A-SP R15	The fabricator/manufacturer designation for the sample	105927
The plant number	Unknown	A detailed description of where the material sample was collected	Belt Cut at Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	Unknown	Lot number	Unknown
Sublot number	Unknown	Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Test Comments	Privacy Level
2019-04-24-33-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	05/06/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/09/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	05/07/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory	05/07/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Larry Diaz, CT D08 - Fontana Southern Regional Laboratory	05/08/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-6	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/07/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/09/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/09/2019	Yes	06/06/2019		Public - Test Data Visible
2019-04-24-33-9	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/09/2019	Yes	06/06/2019	RAP Gradation after Ignition Oven	Public - Test Data Visible
2019-04-24-33-10	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	05/09/2019	Yes	06/06/2019	Combined Virgin/RAP Gradation w/Correlation Factors applied	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-04-24-33-1 AASHTO T27-14 (Verified)
DIME Test ID: 2019-04-24-33-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2019-04-24-33-3 AASHTO T85-13 (Verified)
DIME Test ID: 2019-04-24-33-4 AASHTO T84-14 (Verified)
DIME Test ID: 2019-04-24-33-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2019-04-24-33-6 AASHTO T176-08 (Verified)
DIME Test ID: 2019-04-24-33-7 ASTM D4791-10 (Verified)
DIME Test ID: 2019-04-24-33-8 AASHTO T304-11 (Verified)
DIME Test ID: 2019-04-24-33-9 CTM 202-November 2011 (Verified)
DIME Test ID: 2019-04-24-33-10 CTM 202-November 2011 (Verified)