Sample Record
DIME Sample ID 2019-04-16-10
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 99999 DEA: 0322222 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | (Verified on 04/05/2013) |
Owner Lab
- CT HQ - Sacramento Structural Materials Testing Laboratory
Sample Information
| Sample Taken Date | 04/16/2019 | Sample Unique Key | 10 |
|---|---|---|---|
| Date that the sample was received by the laboratory/organization performing the testing | 04/16/2019 | Sample type | Quality Assurance |
| A brief description of the sample | Testing A325 | The quantity of what the sample constitutes | 12 |
| From where was the sample collected | Other | First name of sampler or witnessed by | john |
| Last name of sampler or witnessed by | omara | Title of sampler | |
| Telephone number of sampler | Laboratory sample identification | ||
| Linked DIME Sample ID | The fabricator/manufacturer/facility name | omara fabricator | |
| Transportation Laboratory (TL) Number | Inspector Lot Number from the Transportation Laboratory (TL) Form | ||
| Structure unique identifier | Not set | Structure name | Not set |
| Bid Item | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | Nut Mfg. Lot Number(s) | ||
| Washer Mfg. Lot Number(s) | Bolt Specification | A325 | |
| Bolt Length(s) | Unknown | Nut Specification | N.A. |
| Washer Specification | N.A. | Finish | |
| Diameter/Size | Unknown | Bolt Mfg. Lot Number | |
| Rocap Test Requirement(s) | Lubricant Requirements(s) | ||
| Washer Inner Diameter(s) | Bolt Mill Supplier | Not set | |
| Nut Mill Supplier | Not set | Washer Mill Supplier | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2019-04-16-10-1 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | jomara, CT HQ - Sacramento Structural Materials Testing Laboratory | 04/16/2019 | 04/16/2019 | No | test 1 - sample 1A | |||
| 2019-04-16-10-2 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | jomara, CT HQ - Sacramento Structural Materials Testing Laboratory | 04/16/2019 | 04/16/2019 | No | test 1 - sample 2B | |||
| 2019-04-16-10-3 | ASTM F606-14a: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Proof Load with Wedge) | jomara, CT HQ - Sacramento Structural Materials Testing Laboratory | 04/16/2019 | 04/16/2019 | No | test 1 - sample 1C |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2019-04-16-10-1 ASTM F606-14a
DIME Test ID: 2019-04-16-10-2 ASTM F606-14a
DIME Test ID: 2019-04-16-10-3 ASTM F606-14a