DIME - Sample Record for DIME Sample ID 2019-03-29-14

DIME » All Projects » Project - DEA: 024C40V4 » Sample 2019-03-29-14 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2019-03-29-14

Project Information

Project Identifiers	Project ID: 213469 DEA: 024C40V4 EFIS: 0218000125
DIST-CO-RTE-PM	02-SHA-5-R3.8/R11.7
Award Date	11/06/2018
Closeout Date	08/16/2023
Work Description	WIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB
Location Description	SHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING
QA Service Level	1 (Verified on 12/31/2018)

Sample Information

Sample Taken Date	03/29/2019	Sample Unique Key	14
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	03/29/2019
Sample type	Verification	A brief description of the sample	1/2-inch OGFC Untreated Aggregate
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Source
First name of sampler or witnessed by	Theodore	Last name of sampler or witnessed by	Kinsey
Title of sampler		Telephone number of sampler
Laboratory sample identification	D77809F	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Fawndale Rock and Asphalt	Transportation Laboratory (TL) Number	857581
Inspector Lot Number from the Transportation Laboratory (TL) Form	0	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0017::FAWNDALE ROCK QUARRY
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	19-1001.314
The plant number	Unknown	A detailed description of where the material sample was collected	Lab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	JMF 19-03-S1	Lot number	0
Sublot number	0	Aggregate Mix Number	Not set

JMF Information

Verification ID	JMF3513-2019-55	Date Created	04/12/2019
JMF Submittal ID	JMF3511-22-2019-81	JMF Status	Submittal Rejected For Use
Producer Mix ID	19-1001.314	Rejected Date	08/19/2024

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Privacy Level
2019-03-29-14-1	CTM 204-June 2010: Method of Test for Liquid Limit, Plastic Limit and Plasticity Index of Soils (Plasticity Index)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	04/12/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-2	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	04/12/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	04/16/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	04/16/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-5	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	04/12/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-6	AASHTO T210-15: Standard Method of Test for Aggregate Durability Index (Durability Index)	Terry McCormick, CT D02 - Redding Northern Regional Laboratory	04/15/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-7	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	04/24/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-8	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	NRML-R, CT D02 - Redding Northern Regional Laboratory	04/12/2019	Yes	08/19/2024	Public - Test Data Visible
2019-03-29-14-9	AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)	Agg Lab, CT D02 - Redding Northern Regional Laboratory	05/15/2019	Yes	08/19/2024	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2019-03-29-14-1 CTM 204-June 2010 (Verified)
DIME Test ID: 2019-03-29-14-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2019-03-29-14-3 AASHTO T85-13 (Verified)
DIME Test ID: 2019-03-29-14-4 AASHTO T84-14 (Verified)
DIME Test ID: 2019-03-29-14-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2019-03-29-14-6 AASHTO T210-15 (Verified)
DIME Test ID: 2019-03-29-14-7 ASTM D4791-10 (Verified)
DIME Test ID: 2019-03-29-14-8 AASHTO T27-14 (Verified)
DIME Test ID: 2019-03-29-14-9 AASHTO T104-99r16 (Verified)