DIME - Sample Record for DIME Sample ID 2018-11-20-1

DIME » All Projects » Project - DEA: 044G0564 » Sample 2018-11-20-1 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2018-11-20-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212618 DEA: 044G0564 EFIS: 0417000154
DIST-CO-RTE-PM	04-ALA-680-M2.4/M12.4
Award Date	11/16/2017
Closeout Date	12/08/2022
Work Description	ROADWAY REHAB, BRIDGE REPLACEMENT, RET. WALLS, TOLL SYSTEMS
Location Description	FREMONT AND AT SUNOL FROM MISSION BOULEVARD SEPARATION TO KOOPMAN ROAD UNDERCROSSING
QA Service Level	1 (Verified on 10/16/2017)

Sample Information

Sample Taken Date	11/20/2018	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	11/21/2018
Sample type	Verification	A brief description of the sample	1" x 2 1/4" A325 MG bolt, 1" F436 MG washer
The quantity of what the sample constitutes	5 ea.	From where was the sample collected	Fabricator
First name of sampler or witnessed by	David	Last name of sampler or witnessed by	Flygare
Title of sampler	CA METS QA Inspector	Telephone number of sampler	801-669-2984
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	UIS	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	B76-227-18	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	none
Heat Number(s)	20391740, 0159721	Nut Mfg. Lot Number(s)	n/a
Washer Mfg. Lot Number(s)	Prestige D3945	Bolt Specification	A325 MG
Bolt Length(s)	2 1/4"	Nut Specification	n/a
Washer Specification	F436 MG	Finish	MG
Diameter/Size	1" x 2 1/4" , 1"	Bolt Mfg. Lot Number	SLSB, BMO196
Rocap Test Requirement(s)	none	Lubricant Requirements(s)	none
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Privacy Level
2018-11-20-1-1	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	11/27/2018	Yes	12/07/2018	Public - Test Data Visible
2018-11-20-1-2	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	11/27/2018	Yes	12/07/2018	Public - Test Data Visible
2018-11-20-1-3	ASTM B499-14: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	11/27/2018	Yes	12/07/2018	Public - Test Data Visible
2018-11-20-1-4	ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	11/27/2018	Yes	12/07/2018	Public - Test Data Visible
2018-11-20-1-5	ASTM E18-15: Standard Test Methods for Rockwell Hardness of Metallic Materials (Hardness)	Steven Paine, CT HQ - Sacramento Structural Materials Testing Laboratory	11/27/2018	Yes	12/07/2018	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-11-20-1-1 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-11-20-1-2 ASTM B499-14 (Verified)
DIME Test ID: 2018-11-20-1-3 ASTM B499-14 (Verified)
DIME Test ID: 2018-11-20-1-4 ASTM E18-15 (Verified)
DIME Test ID: 2018-11-20-1-5 ASTM E18-15 (Verified)