Sample Record
Owner Lab
- CT D02 - Redding Northern Regional Laboratory
DIME Sample ID 2018-10-16-4
Project Information
| Project Identifiers | Project ID: 213134 DEA: 024F77U4 EFIS: 0217000022 |
|---|---|
| DIST-CO-RTE-PM | 02-MOD-299-23.1/23.6, 24.5/33.5 |
| Award Date | 05/08/2018 |
| Closeout Date | 09/02/2020 |
| Work Description | BRIDGE REPLACE, ROADWAY REHAB/FULL DEPTH RECLAMATION-CEMENT + HMA |
| Location Description | MODOC COUNTY ABOUT 6 MILES WEST OF ALTURAS FROM 0.3 MILE WEST TO 0.3 MILE EAST OF CALDWELL CREEK BRIDGE AND 1.1 MILES EAST OF CALDWELL CREEK BRIDGE TO 1.7 MILES WEST OF COUNTY ROAD 75 |
| QA Service Level | 1 (Verified on 04/02/2018) |
Sample Information
| Sample Taken Date | 10/16/2018 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/17/2018 |
| Sample type | Department Acceptance | A brief description of the sample | 3/4-inch Type A HMA 15 rap PG 64-28m Albina |
| The quantity of what the sample constitutes | Street sample 5 boxs | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | D | Last name of sampler or witnessed by | Harper |
| Title of sampler | Consultant | Telephone number of sampler | Unknown |
| Laboratory sample identification | D77712 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Hat Creek - Shaw Pit Facility | Transportation Laboratory (TL) Number | T101 C728556 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | T101 C 728556 | Structure unique identifier | Not set |
| Structure name | Not set | Bid Item | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | Not set |
| Sublot number | Not set | HMA Mix Number | Not set |
| Binder content (%) | Not set | Virgin binder PG | Not set |
| Design binder PG | Not set | Binder Supplier | Not set |
| RAP content (%) | Not set | WMA Additives | Not set |
| Antistrip type | Not set | HMA Pay | No |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2018-10-16-4-1 | AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 10/17/2018 | No | Street sample, 3/4 HMA A, lime, 15% rap, PG64-28m Albina. | ||||
| 2018-10-16-4-2 | AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 10/18/2018 | No | Street sample, 3/4 HMA A, lime, 15% rap, PG64-28m Albina., | ||||
| 2018-10-16-4-3 | AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 10/18/2018 | No | Street sample, 3/4 HMA A, lime, 15% rap, PG 64-28m Albina KF, Shaw Pit | ||||
| 2018-10-16-4-4 | AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void) | Terry McCormick, CT D02 - Redding Northern Regional Laboratory | 10/18/2018 | No | Street sample, 3/4 HMA A, lime, 15% rap, PG 64-28m Albina KF, Shaw Pit |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2018-10-16-4-1 AASHTO T209-12
DIME Test ID: 2018-10-16-4-2 AASHTO T308-10
DIME Test ID: 2018-10-16-4-3 AASHTO T275-07r12
DIME Test ID: 2018-10-16-4-4 AASHTO T269-14
