DIME » All Projects » Project - DEA: 024F5504 » Sample 2018-10-02-2 » Sample Details

Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2018-10-02-2

Project Information

Project IdentifiersProject ID: 212680
DEA: 024F5504
EFIS: 0213000005
DIST-CO-RTE-PM02-SIS-89-20.9 - 21.2
Award Date11/14/2017
Closeout Date05/15/2019
Work DescriptionBRIDGE REPLACEMENT WITH PRE-CAST I-GIRDER AND RECONSTRUCT HIGHWAY
Location DescriptionSISKIYOU COUNTY NEAR MCCLOUD FROM 0.2 MILE SOUTH TO 0.2 MILE NORTH OF MUD CREEK BRIDGE
QA Service Level1 (Verified on 02/12/2018)

Sample Information

Sample Taken Date10/02/2018 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/02/2018
Sample typeDepartment Acceptance A brief description of the samplePSE 3/4-inch Type A HMA, 15 rap PG 64-28m Valero
The quantity of what the sample constitutesPSE 16 boxs From where was the sample collectedManufacturer
First name of sampler or witnessed byMichael Last name of sampler or witnessed byAllegretto
Title of samplerPEI Telephone number of samplerUnknown
Laboratory sample identificationD77675 Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameTullis, Northstate Asphalt, Redding, CA Transportation Laboratory (TL) NumberT101 C 002145
Inspector Lot Number from the Transportation Laboratory (TL) FormT101 C 002145 Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot numberNot set
Sublot numberNot set HMA Mix NumberNot set
HMA PayNo

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2018-10-02-2-1AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/02/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG 64-28m Valero Info
2018-10-02-2-2AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/03/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG 64-28m Valero Info
2018-10-02-2-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/04/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG 64-28m Valero Info
2018-10-02-2-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/04/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG 64-28m Valero Info
2018-10-02-2-5AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/11/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG 64-28m Valero Info
2018-10-02-2-6AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Terry McCormick, CT D02 - Redding Northern Regional Laboratory10/11/2018Terry McCormick
No
PSE, 3/4 HMA A, 15% rap, PG 64-28m Valero Info

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2018-10-02-2-1 AASHTO T209-12
DIME Test ID: 2018-10-02-2-2 AASHTO T308-10
DIME Test ID: 2018-10-02-2-3 AASHTO T275-07r12
DIME Test ID: 2018-10-02-2-4 AASHTO T269-14
DIME Test ID: 2018-10-02-2-5 AASHTO T324-14
DIME Test ID: 2018-10-02-2-6 AASHTO T283-14