DIME - Sample Record for DIME Sample ID 2018-08-30-1

DIME » All Projects » Project - DEA: 010B5504 » Sample 2018-08-30-1 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2018-08-30-1

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 212573 DEA: 010B5504 EFIS: 0112000137
DIST-CO-RTE-PM	01-MEN-162-16.2
Award Date	09/28/2017
Closeout Date	10/05/2020
Work Description	RECONSTRUCT ROADWAY, CONSTRUCT SOLDIER PILE AND TIEBACK WALL
Location Description	MENDOCINO COUNTY ON ROUTE 162 1 MILE EAST OF MIDDLE FORK EEL RIVER BRIDGE
QA Service Level	1 (Verified on 10/03/2017)

Sample Information

Sample Taken Date	08/30/2018	Sample Unique Key	1
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	08/31/2018
Sample type	Verification	A brief description of the sample	anchor bolts
The quantity of what the sample constitutes	6 and 5	From where was the sample collected	Fabricator
First name of sampler or witnessed by	David	Last name of sampler or witnessed by	Flygare
Title of sampler	CT METS QA INSPECTOR	Telephone number of sampler	801-669-2984
Laboratory sample identification	Unknown	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	UIS	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	B76-177-18	Structure unique identifier	Not set
Structure name	Not set	Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	n/a
Heat Number(s)	DL171103150,DL17105664,10459880	Nut Mfg. Lot Number(s)	n/a
Washer Mfg. Lot Number(s)	n/a	Bolt Specification	A449
Bolt Length(s)	6" and 4"	Nut Specification	n/a
Washer Specification	n/a	Finish	HDG
Diameter/Size	1/2" x 4" , 5/8" x 6"	Bolt Mfg. Lot Number	79139,79141,97405,97217,97406
Rocap Test Requirement(s)	none	Lubricant Requirements(s)	none
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2018-08-30-1-1	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-2	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-3	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-4	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-5	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-6	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-7	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-8	ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)	Brian, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018	09/07/2018	Yes	09/18/2018	A449 All Thread	Public - Test Data Visible
2018-08-30-1-9	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018		Yes	09/18/2018		Public - Test Data Visible
2018-08-30-1-10	ASME B1.2-83r01: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Brian Ewing, CT HQ - Sacramento Structural Materials Testing Laboratory	09/07/2018		Yes	09/18/2018		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2018-08-30-1-1 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-2 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-3 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-4 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-5 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-6 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-7 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-8 ASTM F606-14 (Verified)
DIME Test ID: 2018-08-30-1-9 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-10 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-11 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-12 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-13 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-14 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-15 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-16 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-17 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-18 ASME B1.2-83r01 (Verified)
DIME Test ID: 2018-08-30-1-19 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-20 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-21 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-22 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-23 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-24 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-25 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-26 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-27 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-28 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-29 ASTM B499-14 (Verified)
DIME Test ID: 2018-08-30-1-30 ASME B1.2-83r01 (Verified)